Siemens SPS starter kit 6ED1057-3BA00-0AA8 12 Vdc, 24 Vdc 6ED1057-3BA00-0AA8 Ficha De Dados
Códigos do produto
6ED1057-3BA00-0AA8
User interface
2.8 Menu bar
LOGO!Soft Comfort Online Help
Operating Instructions, 06/2014
Operating Instructions, 06/2014
87
Configuring the log file
You can export all I/O status information to a .CSV file. You can change or remove the path
for saving the log file.
To save the I/O status information to a .CSV file, follow these steps:
1. Click "
To save the I/O status information to a .CSV file, follow these steps:
1. Click "
②
" in the screen above and specify a path for saving the log file.
2. You can also remove the log file if you click "
③
" in the screen above.
3. Save the I/O status information to the specified log file.
If you do not specify a log file, LOGO!Soft Comfort closes the I/O Status Overview without
If you do not specify a log file, LOGO!Soft Comfort closes the I/O Status Overview without
saving it to a file.
2.8.5.18
Tools -> Transfer -> Diagnostic (0BA7 and 0BA8 only)
LOGO!Soft Comfort requires that you confirm the connection interface from the "Interface"
dialog for each communication attempt. See "Tools -> Transfer (Page 70)" for complete
information.
The diagnostic function tracks the following types of basic error information:
● LOGO! Base Module 0BA7:
The diagnostic function tracks the following types of basic error information:
● LOGO! Base Module 0BA7:
– Network access errors
– Expansion module bus errors
– SD card read/write errors
– SD card write protection
– Expansion module bus errors
– SD card read/write errors
– SD card write protection
● LOGO! Base Module 0BA8:
– Ethernet link errors
– Expansion module changed
– SD card read/write errors
– SD card does not exist
– SD card is full
– Expansion module changed
– SD card read/write errors
– SD card does not exist
– SD card is full