Wago 759-302 COMMISSIONING TOOL I/O-CHECK 2 759-302 Ficha De Dados

WAGO-I/O-CHECK Overview    •  15 

WAGO-I/O-CHECK is an easy to use Windows application that will allow 
the user to operate and represent a node from the WAGO-I/O-SYSTEM 750 
without the need to connect the node to a field bus system. 

WAGO-I/O-CHECK was developed to be able to address individual nodes 
during the start-up phase without having to rely on an active field bus system. 

Note: 
Disconnect the node from the active field bus prior to processing the 
process data with WAGO-I/O-CHECK. 

WAGO-I/O-CHECK works with the components of the WAGO-I/O-
SYSTEM 750 independent of the coupler used. Exceptions will be described 
at the manual. 

WAGO-I/O-CHECK reads the configuration of a connected node from the 
coupler and displays the node on the screen of your PC. The graphical 
representation of the node can be printed out together with a configuration list. 

WAGO-I/O-CHECK allows the display and default entry of process data of 
individual I/O modules. 

To ensure the communication between WAGO-I/O-CHECK and the node, 
the coupler is connected to a free serial interface (port) of your PC using the 
communication cable as part of our scope of delivery. 

Note: 
Disconnect the node from the active field bus prior to processing the 
process data with WAGO-I/O-CHECK. Depending on the coupler setting, 
set outputs will be reset or remain set after disconnection. 

 

Warning! 
Outputs which are set manually by WAGO-I/O-CHECK (e.g. motor 
contactors, or valves) will remain until they are manually reset. In this 
case, switching the outputs off via control software (e.g. by limit switches) 
has no effect !