Wago 759-302 COMMISSIONING TOOL I/O-CHECK 2 759-302 Ficha De Dados

32  •    Controls (Overview) 

 

The statusbar is placed at the bottom of the WAGO-I/O-CHECK window. It 
displays informations on commands, connection parameters and status and the 
operation mode. 

Use the command Statusbar from the menu View to toggle the statusbar ON or 
OFF. 

As you move through the menu with the arrow keys the left area of the status 
bar describes the the function of the menu entries. In the same manner this 
area also describes the effect of the toolbar buttons if these are clicked and 
held down. Release the mouse button when the cursor is no longer on the 
toolbar button if you do not want to execute the command associated by the 
toolbar button. A progress bar and a describing text appears to display the 
progress of various actions. 

 

In the middle area of the statusbar the parameters of the serial interface and the 
operation mode of WAGO-I/O-CHECK are displayed: 

 

The right area of the statusbar shows the status of the connection to the 
coupler: 

 

 

The connection to the coupler is not active. 

 

WAGO-I/O-CHECK is polling the process data out of the 
connected node. 

 

If all LED´s are switched off (gray), the node configuration 
has not been read and data is not beein exchanged between 
WAGO-I/O-CHECK and the coupler. 

 

The green LED (left side) is lit if the node configuration was 
successfully read.