Wago 759-302 COMMISSIONING TOOL I/O-CHECK 2 759-302 Ficha De Dados
Códigos do produto
759-302
42 • Controls (Overview)
Dialog
Boxes
WAGO-I/O-SYSTEM
759
WAGO-I/O-CHECK
2
Warning!
Outputs which are set manually by WAGO-I/O-CHECK (e.g. motor
contactors, or valves) will remain until they are manually reset. In this
case, switching the outputs off via control software (e.g. by limit switches)
has no effect !
Outputs which are set manually by WAGO-I/O-CHECK (e.g. motor
contactors, or valves) will remain until they are manually reset. In this
case, switching the outputs off via control software (e.g. by limit switches)
has no effect !
Note:
Please refer to the chapter Notes on Setting and Resetting of Digital I/O
Modules concerning the reaction of digital outputs in the different
operation modes.
Please refer to the chapter Notes on Setting and Resetting of Digital I/O
Modules concerning the reaction of digital outputs in the different
operation modes.
Note:
The state of digital outputs is indicated in the node display by colored
LED´s. To toggle the state it is also possible to click the LED´s.
The state of digital outputs is indicated in the node display by colored
LED´s. To toggle the state it is also possible to click the LED´s.
A click with the right mouse key on the text box of the description column
opens a context menu to rename the channel description.
opens a context menu to rename the channel description.
4.8.2.11 Context Menues of the Process Data Dialog Boxes of the Analog Input
Modules
A click with the right mouse key on the column header of the measuring
values opens the following context menu:
values opens the following context menu:
Hexadecimal
This command switches the display format of the measuring
value to a hexadecimal value.
value to a hexadecimal value.
Units (V, mA, °C)
This command switches the display format of the
measuring value to physical units.
State
This command toggles an additional column with state
values ON or OFF.
values ON or OFF.
The setting has effect on all measuring values of the analog input module. A
click with the right mouse key on the measuring value itself opens the context
menu to change the display format only for the selected measuring value. The
menu item of the selected format is hooked.
click with the right mouse key on the measuring value itself opens the context
menu to change the display format only for the selected measuring value. The
menu item of the selected format is hooked.
A click with the right mouse key on the column header of the state values
opens the following context menu:
opens the following context menu: