Wago 759-302 COMMISSIONING TOOL I/O-CHECK 2 759-302 Ficha De Dados
Códigos do produto
759-302
Controls (Overview) • 45
Dialog Boxes
WAGO-I/O-SYSTEM 759
WAGO-I/O-CHECK 2
A click with the right mouse key on the channel description opens a context
menu to rename the channel description.
menu to rename the channel description.
4.8.2.14 Context Menues of the Process Data Dialog Boxes of the Analog Output
Modules
A click with the right mouse key on the measuring value or the slider opens
the following context menu:
the following context menu:
Hexadecimal
This command switches the display format of the measuring
value to a hexadecimal value.
value to a hexadecimal value.
Units (V, mA, °C)
This command switches the display format of the
measuring value to physical units.
Rename ...
Use this command to open a dialog box for the input of a
new channel description.
Press the OK button to save the new description and close
the dialog box,
press the C
new channel description.
Press the OK button to save the new description and close
the dialog box,
press the C
ANCEL
button to close the dialog box without
saving.
4.8.2.15 Notes on Setting of Analog Outputs
Depending on the selected Control-Mode, operator actions affect the output
process image of the node in different ways:
process image of the node in different ways:
In the Control-Mode Direct, an analog output is set by moving the slider or
entering a value into the edit box and pressing the <Enter> key subsequently.
entering a value into the edit box and pressing the <Enter> key subsequently.
In the Control-Mode Collect, settings of analog outputs are collected and sent
to the node as the button S
to the node as the button S
END
D
ATA
is pressed.
In the Control-Mode Force, an analog output reacts as in the Control-Mode
Direct.
Direct.
In the Control-Mode Permanent, settings of analog outputs will remain after
the termination of the connection to the node until a node reset.
the termination of the connection to the node until a node reset.