Wago 759-302 COMMISSIONING TOOL I/O-CHECK 2 759-302 Ficha De Dados
Códigos do produto
759-302
58 • Controls (Overview)
Dialog
Boxes
WAGO-I/O-SYSTEM
759
WAGO-I/O-CHECK
2
has no effect !
Note:
Please refer to the chapters Notes on Setting and Resetting of Digital I/O
Modules and Notes on Setting of Analog Output Modules concerning the
reaction of outputs in the different operation modes.
Please refer to the chapters Notes on Setting and Resetting of Digital I/O
Modules and Notes on Setting of Analog Output Modules concerning the
reaction of outputs in the different operation modes.
4.8.2.22.4.2 Safety at Work Monitor
The headline shows the address of the selected slave and the second line
shows the status of the selected slave:
shows the status of the selected slave:
Projected
A slave has been projected at the selected address.
Detected
A slave has been detected at the selected address.
Activated
Projected and detected configuration of the slave at the selected address
are the same and the slave has ben activated.
are the same and the slave has ben activated.
Press the S
CAN
button to scan the selected slave manually.
Please refer to the documentation of the Safety at Work Monitor or the
documentation of the selected slave for the meaning of the AS-i Safety
Monitor or Enable Circuit 1/2 tables.
documentation of the selected slave for the meaning of the AS-i Safety
Monitor or Enable Circuit 1/2 tables.
Press the R
EAD
D
IAGNOSIS
button to get the diagnosis informations of the
selected Safety at Work Monitor.
Note:
This function causes an error message if the selected slave is not a Safety at
Work Monitor.
This function causes an error message if the selected slave is not a Safety at
Work Monitor.