Wago 759-302 COMMISSIONING TOOL I/O-CHECK 2 759-302 Ficha De Dados

Controls (Overview)    •  63 

Press the S

 button to save the actual settings into a file. A dialog box will 

be opened to enter a filename and path. 

Press the O

 button to open a file with already saved settings. A dialog box 

will be opened to enter a filename and path. 

 

 

Use the edit boxes Offset and Gain to change the offset and gain values for 
the hardware alignment. If required, you can adjust the offset for the wire 
resistance with the edit box 2-Wire Offset when performing a 2-wire 
measurement. Inputs are done in hexadecimal format. 

The output box shows the actual measurement value in hexadecimal format. 

Press the OK button to store the changed values in the EEPROM of the 
module and to close the alignment dialog box. 

Press the C

 button to quit the alignment dialog box without storing any 

values inthe EEPROM of the module. 

Closing the alignment dialog box switches the operation focus back to the 
parameter dialog box.