Wachendorff WLANCL00 WLAN CLIENT WLANCL00 Ficha De Dados
Códigos do produto
WLANCL00
Order information
Type
Order-No.
WLAN Client IEEE802.11 g/b
WLANCL00
Screwable Demo Whip Antenna 2 dBi included
Accessories
WLAN Access Point Compact IEEE802.11 g/b
WLAN Access Point Compact IEEE802.11 g/b
WLANAP0C
Standard dipole antenna
WLANANT55
Whip antenna 2,4 GHz@4 dBi
High gain antenna
High gain antenna
WLANANT90
Dipol antenna 2,4GHz@9 dBi m. 1,5m cable
DIN-rail power supply, 230VAC/24VDC
DIN-rail power supply, 230VAC/24VDC
PS24V03AA
l Transparent between Ethernet to Wireless networking
IEEE 802.11g/b 54 Mbps wireless network
l Support UDP,TCP server and client protocol for virtual COM mode
and pair connection
l Configurable via built-in web server and Windows based utilities
l Upgradeable firmware via network
l Metal housing and with standard DIN-Rail supported
l Screwable Demo Whip Antenna 2 dBi included
and pair connection
l Configurable via built-in web server and Windows based utilities
l Upgradeable firmware via network
l Metal housing and with standard DIN-Rail supported
l Screwable Demo Whip Antenna 2 dBi included
The WLANCL00
WLANCL00
WLANCL00
Wireless Client Adaptor is a bridge between wireless
LAN and Ethernet communications. There is one Ethernet port to
connect to IEEE802.11g/b wireless network. The information
transmitted by Wireless Client Adaptor is transparent to both host
computers (IP network over wireless LAN) and device (Ethernet). Data
from the wireless LAN is transmitted to the designated Ethernet port and
data from Ethernet port is transmitted to the Wireless(TCP/IP)
transparently.
By using
connect to IEEE802.11g/b wireless network. The information
transmitted by Wireless Client Adaptor is transparent to both host
computers (IP network over wireless LAN) and device (Ethernet). Data
from the wireless LAN is transmitted to the designated Ethernet port and
data from Ethernet port is transmitted to the Wireless(TCP/IP)
transparently.
By using
, these devices can be communicated over a
wireless network to send or receive information from e.g., a backend
server or database. In the computer integration manufacturing or
industrial automation area, Wireless Client Adaptor is used for field
devices to direct connect to network.
Many control devices provide the ability to communicate with hosts
through Ethernet, it’s hard to transfer data through Wireless or long
distance. With
server or database. In the computer integration manufacturing or
industrial automation area, Wireless Client Adaptor is used for field
devices to direct connect to network.
Many control devices provide the ability to communicate with hosts
through Ethernet, it’s hard to transfer data through Wireless or long
distance. With
, it is possible to communicate with a remote
device in the Intranet environment or even in the Internet and thus,
increase the communication distance dramatically.
increase the communication distance dramatically.
System
32-Bit CPU, 150 MHz RISC processor with MMU,
2 + 8 MB flash memory (2 MB for boot loader),
32 MB SDRAM, 2 KByte EEPROM,
hardware build-in watchdog.
32-Bit CPU, 150 MHz RISC processor with MMU,
2 + 8 MB flash memory (2 MB for boot loader),
32 MB SDRAM, 2 KByte EEPROM,
hardware build-in watchdog.
Ethernet
Compliant to IEEE802.3 standard, RJ-45 connector, 10/100 Mbps data
rate with auto detection, automatic MDI/MDI-X.
Compliant to IEEE802.3 standard, RJ-45 connector, 10/100 Mbps data
rate with auto detection, automatic MDI/MDI-X.
WLAN
Compliant to IEEE802.11g/b standard, Mini-PCI (for wireless modules),
64-bit/128-bit WEP data encryption, WPA/WPA2-PSK compatibel
(supports TKIP/AES encryption), modulation: CCK, DQPSK, DBPSK,
OFDM (11g); TX power: 11b: 15 dBm, 11g: 14 dBm;
RX sensitivity: -66 dBm@54 Mbps, -80 dBm@11 Mbps;
Transmission rate 54 Mbps (max.) with auto fallback, transmission
distance up to 300 m; topology: infrastructure, Ad-Hoc
Antenna connector: reverse SMA.
The WLAN access point has been specially designed for industrial
applications and tested. The combination with non-industrial WLAN
USB sticks is not recommended.
Compliant to IEEE802.11g/b standard, Mini-PCI (for wireless modules),
64-bit/128-bit WEP data encryption, WPA/WPA2-PSK compatibel
(supports TKIP/AES encryption), modulation: CCK, DQPSK, DBPSK,
OFDM (11g); TX power: 11b: 15 dBm, 11g: 14 dBm;
RX sensitivity: -66 dBm@54 Mbps, -80 dBm@11 Mbps;
Transmission rate 54 Mbps (max.) with auto fallback, transmission
distance up to 300 m; topology: infrastructure, Ad-Hoc
Antenna connector: reverse SMA.
The WLAN access point has been specially designed for industrial
applications and tested. The combination with non-industrial WLAN
USB sticks is not recommended.
Supply: 9 to 48 VDC, max. 4,5 W consuption (during transmission)
Temperature range: Operation: 0 °C to +65 °C,
Storage: -40 °C to +85 °C
Dimensions (WxHxD): 45 mm x 91 mm x 80 mm
Software and configuration: Web interface / software program
Supported protocols: ICMP, IP, TCP, UDP, DHCP Client, Telnet, DNS,
SNMP, HTTP, SMTP, SNTP
SNMP, HTTP, SMTP, SNTP
Wireless Client 802.11g WLANCL00
Wachendorff Prozesstechnik GmbH & Co. KG
Industriestrasse 7
D-65366 Geisenheim
Tel.: +49 (0) 67 22 / 99 65 - 20
Fax: +49 (0) 67 22 / 99 65 - 78
www.wachendorff-prozesstechnik.de
Industriestrasse 7
D-65366 Geisenheim
Tel.: +49 (0) 67 22 / 99 65 - 20
Fax: +49 (0) 67 22 / 99 65 - 78
www.wachendorff-prozesstechnik.de
WLANCL00
Dimensions in mm
Copyright by Wachendorff Prozesstechnik GmbH & Co. KG. All information without guarantee, subject to change without notice. The contents of the
document contents of a periodic review; the newest version could be found on our web site.
document contents of a periodic review; the newest version could be found on our web site.
Date: 21.12.2012