IBM Infoprint 1332 L 75P5068 Manual Do Utilizador
Códigos do produto
75P5068
Description
The Infoprint 1332 is a monochrome printer that supports
up to A4/Letter-size media at up to 35 pages per minute
(PPM). The new models are lower-cost models that come
with a 5,000-print toner cartridge instead of a 21,000-print
cartridge. These new L models include both base models
and network models.
up to A4/Letter-size media at up to 35 pages per minute
(PPM). The new models are lower-cost models that come
with a 5,000-print toner cartridge instead of a 21,000-print
cartridge. These new L models include both base models
and network models.
•
Base models
The base models come standard with 32 MB of
memory, a 100-sheet auxiliary tray, and one 250-sheet
drawer.
memory, a 100-sheet auxiliary tray, and one 250-sheet
drawer.
Standard input capacity is 350 sheets and
standard output capacity is 250 sheets. Model 007 is
the low-voltage model and 008 is the high-voltage
model.
the low-voltage model and 008 is the high-voltage
model.
•
Network models
The network models come standard with 64 MB of
memory, a 100-sheet auxiliary tray, one 250-sheet
drawer, and a 10/100BaseTX Fast Ethernet port.
Standard input capacity is 350 sheets and standard
output capacity is 250 sheets.
memory, a 100-sheet auxiliary tray, one 250-sheet
drawer, and a 10/100BaseTX Fast Ethernet port.
Standard input capacity is 350 sheets and standard
output capacity is 250 sheets.
Model N07 is the
low-voltage model and N08 is the high-voltage model.
All models have a maximum input capacity of 3,850
sheets and a maximum output capacity of 2,750 sheets.
sheets and a maximum output capacity of 2,750 sheets.
High performance controller
The Infoprint 1332 controller features a 300 MHz
processor.
processor.
It comes with PostScript 3 and PCL 6
emulation, PDF V1.2 and V1.3 as standard data streams,
and a PPDS migration tool.
and a PPDS migration tool.
•
Memory
The controller has two slots for memory DIMMs, two
slots for flash memory cards or application solution
cards, and one slot for internal network adapters, local
adapters, or hard drives.
slots for flash memory cards or application solution
cards, and one slot for internal network adapters, local
adapters, or hard drives.
The base models come with 32 MB of memory
soldered onboard and can support a maximum of 288
MB of memory with two 128 MB DIMMs installed. The
network models come with 64 MB of memory soldered
onboard and can support a maximum of 320 MB of
memory with two 128 MB DIMMs installed. A 20+ GB
hard disk with adapter feature is available.
soldered onboard and can support a maximum of 288
MB of memory with two 128 MB DIMMs installed. The
network models come with 64 MB of memory soldered
onboard and can support a maximum of 320 MB of
memory with two 128 MB DIMMs installed. A 20+ GB
hard disk with adapter feature is available.
Flash memory up to 32 MB is supported using the flash
memory cards. Flash memory cards can be installed
in either flash memory slot, but the controller supports
only one flash memory card.
memory cards. Flash memory cards can be installed
in either flash memory slot, but the controller supports
only one flash memory card.
•
Printer system attachment interfaces
The base models come with an IEEE 1284 Parallel
interface with a type B connector and a Universal
Serial Bus (USB) interface as standard.
interface with a type B connector and a Universal
Serial Bus (USB) interface as standard.
The network models come with a USB interface and a
10/100BaseTX Fast Ethernet interface as standard.
They do not have a Parallel interface.
10/100BaseTX Fast Ethernet interface as standard.
They do not have a Parallel interface.
The standard
Fast Ethernet interface does not take up the network
adapter slot. Wireless Ethernet is supported through
the wired Ethernet port on either the base models with
the Ethernet option installed or the network models.
adapter slot. Wireless Ethernet is supported through
the wired Ethernet port on either the base models with
the Ethernet option installed or the network models.
Usage rates
The maximum monthly usage is 175,000 impressions.
IBM does not recommend printing to the monthly
maximum on a consistent basis.
IBM does not recommend printing to the monthly
maximum on a consistent basis.
Print quality
The resolutions of the Infoprint 1332 are:
•
1200 x 1200 dpi
•
1200 Image Quality
•
600 x 600 dpi
•
300 x 300 dpi
The Toner Darkness setting offers 10 user-selectable
settings to balance print darkness and toner savings. The
higher the setting, the darker the print. Within the range
of print darkness settings, up to 50% toner savings can
be realized. The factory default setting is 8.
settings to balance print darkness and toner savings. The
higher the setting, the darker the print. Within the range
of print darkness settings, up to 50% toner savings can
be realized. The factory default setting is 8.
Font support
The Infoprint 1332 printer
′
s resident fonts include support
for following:
Number of
Number of
scalable
bitmapped
Emulation
fonts
fonts
PCL 6
89
2
PostScript 3
158
0
PPDS
39
5
Media handling features
The Infoprint 1332 supports the following media handling
options:
options:
•
250-Sheet Drawer
•
500-Sheet Drawer
•
2000-Sheet Drawer
•
250-Sheet Tray
•
500-Sheet Tray
•
250-Sheet Duplex Unit
•
Envelope Feeder
•
Output Expander
•
High Capacity Output Stacker
•
StapleSmart Finisher
•
250-Sheet Universally Adjustable Tray or Drawer
(UAT)
(UAT)
•
400-Sheet Universally Adjustable Tray or Drawer
(UAT)
(UAT)
103-212
-2-