Samsung S2 Audio Player 2GB White YP-S2QW Manual Do Utilizador

the basics _ 11

Before you start -  Remove the earphones before connecting the direct connect USB adaptor.

ƒ

When you need to recharge the battery.

-  When the battery is too low,

 

the LED blinks red and the color of the selected play 

mode alternately. If the LED is turned off, this will not work.

-  When the battery runs out, the LED blinks red.

 If you are charging the player while it is connected to a laptop computer, make sure the 
laptop’s battery is also fully charged or that the laptop is plugged into its power source.

ƒ

ƒ

Charge the player before using it for the fi rst time and when you haven’t used it 
for a long time.
The battery for your mp3 player will fully charge in about 2 hours, although total 
charging time varies depending on your PC environment. 

1. Connect the mini plug end (A) of the direct connect USB adaptor to the 

Earphone/USB Connection Jack of the player. 

2. Connect the wide (USB) end (B) of the direct connect USB adaptor to the 

USB port (

) on your PC as in the fi gure above.

The LED will blink red while the battery is being charged. When done, it turns green.

ƒ