BTR NETCOM 130C371200-I Ficha De Dados
Datenblatt / Data sheet
E-DAT C6
A
UP0 1 Port
130C371200-I
Produktbeschreibung
Product specification
Bestell-Nr. / Part no.
Abbildungen / Illustration
Maßzeichnung / Dimensions
Anschlussbild / Wiring
Seite/Page 1/2
• Kanal-Anschlusseinheit mit einer 8-poligen RJ45-Buchse
• Cat.6
A
Komponentenprüfung nach ISO/IEC 11801 Ed.2.2:2011-06,
DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08)
und IEC 60603-7-51 Ed.1 (12/2008), GHMT zertifiziert
• Einhaltung der Klasse E
A
bis 500 MHz
nach ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09
• getestet: Komponente bis 600 MHz, Link bis 800 MHz
• für 10 GBit Ethernet (IEEE 802.3an)
• geeignet für Power over Ethernet (PoE, PoE plus und UPoE)
• HF-technisch optimierte und ergonomisch geformte
LSA-Anschlussklemme
• Verschraubung der Klappe für Zugentlastung und Schirmabnahme
erfolgt von vorne
• praxisgerechte Kabelzuführung von 8 Seiten
• Anschluss von Datenleitungen AWG 24/1 - 22/1 (eindrähtig)
• Steckrichtung 45° nach unten geneigt
• kompatibel zu Design-Zentralstücken von Schalterprogrammen
• Geeignet zu Montage in Standard-Unterputzbechern und
Hohlwandbecher
• ohne Abdeckteile
• termination unit with one 8-pole RJ45 jack for mounting in cable
duct
• component testing for Cat.6
A
to ISO/IEC 11801 Ed.2.2:2011-06,
DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08)
and IEC 60603-7-51 Ed.1 (12/2008), certified to GHMT
• compliance with class E
A
up to 500 MHz
to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09
• tested: components up to 600 MHz, link up to 800 MHz
• for 10 GBit Ethernet (IEEE 802.3an)
• suitable for Power over Ethernet (PoE, PoE plus and UPoE)
• ergonomically shaped LSA terminal block optimized for HF
technology
• screwing of the strain relief cover and shield connection from the
front
• practical cable feed from 8 sides
• connection of data lines AWG 24/1 to 22/1 (solid wire)
• plug direction 45° downwards
• compatible with „design“ central units of switch lines
• suitable for mounting in standard flush-mounted and cavity wall
casings
• without cover parts
METZ CONNECT | Im Tal 2 | 78176 Blumberg | Germany | www.metz-connect.com
Phone +49 7702 533-0 | Fax +49 7702 533-433
Vertrieb durch / Distributed by: RIA CONNECT GmbH und / and BTR NETCOM GmbH
Montageanleitung / Mounting instruction siehe / see www.metz-connect.com
Phone +49 7702 533-0 | Fax +49 7702 533-433
Vertrieb durch / Distributed by: RIA CONNECT GmbH und / and BTR NETCOM GmbH
Montageanleitung / Mounting instruction siehe / see www.metz-connect.com
© 201
2
METZ CONNECT
- Technische Änderungen vorbehalten!
Subjects to modifications!