ZyXEL VMG1312-B10A VMG1312-B10A-EU01V1F Ficha De Dados

Chapter 8 Home Networking

VMG1312-B10A User’s Guide

This table allows you to assign IP addresses on the LAN to specific individual computers based on 
their MAC Addresses. 

Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is 
assigned at the factory and consists of six pairs of hexadecimal characters, for example, 
00:A0:C5:00:00:02.

LAN IPv6 
Address Assign 
Setup

Select how you want to obtain an IPv6 address: 

•

stateless + DNS send by RADVD: The Device uses IPv6 stateless autoconfiguration. 

RADVD (Router Advertisement Daemon) is enabled to have the Device send IPv6 prefix 

information in router advertisements periodically and in response to router solicitations. 

DHCPv6 server is disabled. (See 

 for more information on RADVD.)

•

stateless + DNS send by DHCPv6: The Device uses IPv6 stateless autoconfiguration. 

The DNS is provided by a DHCPv6 server.

•

stateful + DHCPv6 server: The Device uses IPv6 stateful autoconfiguration. The 

DHCPv6 server is enabled to have the Device act as a DHCPv6 server and pass IPv6 

addresses, DNS server and domain name information to DHCPv6 clients.

•

stateful + DHCPv6 relay: The Device uses IPv6 stateful autoconfiguration. DHCPv6 

Relay is enabled to have the Device relay client DHCPv6 requests. 

DHCPv6 Configuration

DHCPv6 State 

This shows the status of the DHCPv6. 

IPv6 DNS Values

IPv6 DNS 
Server 1-3

Select From ISP if your ISP dynamically assigns IPv6 DNS server information.

Select User-Defined if you have the IPv6 address of a DNS server. Enter the DNS server 
IPv6 addresses the Device passes to the DHCP clients.

Select None if you do not want to configure IPv6 DNS servers.

IPv6 Address Values

IPv6 Start 
Address

If DHCPv6 is enabled, specify the first IPv6 address in the pool of addresses that can be 
assigned to DHCPv6 clients. 

IPv6 End 
Address

If DHCPv6 is enabled, specify the last IPv6 address in the pool of addresses that can be 
assigned to DHCPv6 clients. 

IPv6 Domain 
Name 

If DHCPv6 is enabled, specify the domain name to be assigned to DHCPv6 clients.

IPv6 Router Advertisement State

RADVD State 

This shows the status of RADVD.

Apply

Click Apply to save your changes.

Cancel

Click Cancel to restore your previously saved settings.

Network Setting > Home Networking > LAN Setup (continued)