ZyXEL VMG1312-B10A VMG1312-B10A-EU01V1F Ficha De Dados

Códigos do produto
VMG1312-B10A-EU01V1F
Página de 378
 Chapter 8 Home Networking
VMG1312-B10A User’s Guide
161
• Some ISPs choose to disseminate the DNS server addresses using the DNS server extensions of 
IPCP (IP Control Protocol) after the connection is up. If your ISP did not give you explicit DNS 
servers, chances are the DNS servers are conveyed through IPCP negotiation. The Device 
supports the IPCP DNS server extensions through the DNS proxy feature.
Please note that DNS proxy works only when the ISP uses the IPCP DNS server extensions. It 
does not mean you can leave the DNS servers out of the DHCP setup under all circumstances. If 
your ISP gives you explicit DNS servers, make sure that you enter their IP addresses in the 
DHCP Setup screen.
8.10.4  LAN TCP/IP 
The Device has built-in DHCP server capability that assigns IP addresses and DNS servers to 
systems that support DHCP client capability.
IP Address and Subnet Mask
Similar to the way houses on a street share a common street name, so too do computers on a LAN 
share one common network number.
Where you obtain your network number depends on your particular situation. If the ISP or your 
network administrator assigns you a block of registered IP addresses, follow their instructions in 
selecting the IP addresses and the subnet mask.
If the ISP did not explicitly give you an IP network number, then most likely you have a single user 
account and the ISP will assign you a dynamic IP address when the connection is established. If this 
is the case, it is recommended that you select a network number from 192.168.0.0 to 
192.168.255.0 and you must enable the Network Address Translation (NAT) feature of the Device. 
The Internet Assigned Number Authority (IANA) reserved this block of addresses specifically for 
private use; please do not use any other number unless you are told otherwise. Let's say you select 
192.168.1.0 as the network number; which covers 254 individual addresses, from 192.168.1.1 to 
192.168.1.254 (zero and 255 are reserved). In other words, the first three numbers specify the 
network number while the last number identifies an individual computer on that network.
Once you have decided on the network number, pick an IP address that is easy to remember, for 
instance, 192.168.1.1, for your Device, but make sure that no other device on your network is 
using that IP address.
The subnet mask specifies the network number portion of an IP address. Your Device will compute 
the subnet mask automatically based on the IP address that you entered. You don't need to change 
the subnet mask computed by the Device unless you are instructed to do otherwise.
Private IP Addresses
Every machine on the Internet must have a unique address. If your networks are isolated from the 
Internet, for example, only between your two branch offices, you can assign any IP addresses to 
the hosts without problems. However, the Internet Assigned Numbers Authority (IANA) has 
reserved the following three blocks of IP addresses specifically for private networks:
• 10.0.0.0     — 10.255.255.255
• 172.16.0.0   — 172.31.255.255
• 192.168.0.0 — 192.168.255.255