ZyXEL VMG1312-B10A VMG1312-B10A-EU01V1F Ficha De Dados
Códigos do produto
VMG1312-B10A-EU01V1F
Chapter 10 Quality of Service (QoS)
VMG1312-B10A User’s Guide
179
10.6 The QoS Policer Setup Screen
Use this screen to configure QoS policers that allow you to limit the transmission rate of incoming
traffic. Click Network Setting > QoS > Policer Setup. The screen appears as shown.
traffic. Click Network Setting > QoS > Policer Setup. The screen appears as shown.
Figure 68
Network Setting > QoS > Policer Setup
The following table describes the labels in this screen.
To Queue Index Select a queue that applies to this class.
You should have configured a queue in the Queue Setup screen already.
Apply
Click Apply to save your changes.
Cancel
Click Cancel to exit this screen without saving.
Table 45
Class Setup: Add/Edit (continued)
LABEL
DESCRIPTION
Table 46
Network Setting > QoS > Policer Setup
LABEL
DESCRIPTION
Add new Policer Click this to create a new entry.
#
This is the index number of the entry.
Status
This field displays whether the policer is active or not. A yellow bulb signifies that this
policer is active. A gray bulb signifies that this policer is not active.
policer is active. A gray bulb signifies that this policer is not active.
Name
This field displays the descriptive name of this policer.
Regulated
Classes
Classes
This field displays the name of a QoS classifier
Meter Type
This field displays the type of QoS metering algorithm used in this policer.
Rule
These are the rates and burst sizes against which the policer checks the traffic of the
member QoS classes.
member QoS classes.
Action
This shows the how the policer has the Device treat different types of traffic belonging to
the policer’s member QoS classes.
the policer’s member QoS classes.
Modify
Click the Edit icon to edit the policer.
Click the Delete icon to delete an existing policer. Note that subsequent rules move up by
one when you take this action.
one when you take this action.