ZyXEL VMG1312-B10A VMG1312-B10A-EU01V1F Ficha De Dados
Códigos do produto
VMG1312-B10A-EU01V1F
Chapter 1 Introducing the Device
VMG1312-B10A User’s Guide
26
You can configure your wireless network in either the built-in Web Configurator, or using the WPS
button.
button.
Figure 5
Wireless Access Example
1.7.1 Using the WLAN/WPS Button
If the wireless network is turned off, press the WLAN/WPS button at the back of the Device for
one second. Once the WLAN/WPS LED turns green, the wireless network is active.
one second. Once the WLAN/WPS LED turns green, the wireless network is active.
You can also use the WLAN/WPS button to quickly set up a secure wireless connection between
the Device and a WPS-compatible client by adding one device at a time.
the Device and a WPS-compatible client by adding one device at a time.
To activate WPS:
1
Make sure the POWER LED is on and not blinking.
2
Press the WLAN/WPS button for five seconds and release it.
3
Press the WPS button on another WPS-enabled device within range of the Device. The WLAN/WPS
LED flashes orange while the Device sets up a WPS connection with the other wireless device.
LED flashes orange while the Device sets up a WPS connection with the other wireless device.
4
Once the connection is successfully made, the WLAN/WPS LED shines green.
To turn off the wireless network, press the WLAN/WPS button on the front of the Device for one to
five seconds. The WLAN/WPS LED turns off when the wireless network is off.
five seconds. The WLAN/WPS LED turns off when the wireless network is off.