ZyXEL VMG1312-B10A VMG1312-B10A-EU01V1F Ficha De Dados

Chapter 4 Tutorials

VMG1312-B10A User’s Guide

This section shows you how to set up a wireless network using WPS. It uses the Device as the AP 
and ZyXEL NWD210N as the wireless client which connects to the notebook. 

Note: The wireless client must be a WPS-aware device (for example, a WPS USB adapter 

or PCMCIA card).

There are two WPS methods to set up the wireless client settings:

• Push Button Configuration (PBC) - simply press a button. This is the easier of the two 

methods.

• PIN Configuration - configure a Personal Identification Number (PIN) on the Device. A wireless 

client must also use the same PIN in order to download the wireless network settings from the 
Device.

Make sure that your Device is turned on and your notebook is within the cover range of the wireless 
signal. 

Make sure that you have installed the wireless client driver and utility in your notebook.

In the wireless client utility, go to the WPS setting page. Enable WPS and press the WPS button 
(Start or WPS button).

Push and hold the WPS button located on the Device’s front panel for more than 5 seconds. 
Alternatively, you may log into Device’s web configurator and go to the Network Setting > 
Wireless > WPS screen. Enable the WPS function and click Apply. Then click the Connect button.