ZyXEL VMG1312-B10A VMG1312-B10A-EU01V1F Ficha De Dados

Chapter 6 Broadband

VMG1312-B10A User’s Guide

Both an IPv6 address and IPv6 subnet mask compose of 128-bit binary digits, which are divided 
into eight 16-bit blocks and written in hexadecimal notation. Hexadecimal uses four bits for each 
character (1 ~ 10, A ~ F). Each block’s 16 bits are then represented by four hexadecimal 
characters. For example, FFFF:FFFF:FFFF:FFFF:FC00:0000:0000:0000.

You need to know your Internet access settings such as encapsulation and WAN IP address. Get this 
information from your ISP.

Use this screen to change your Device’s Internet access settings. Click Network Setting > 
Broadband from the menu. The summary table shows you the configured WAN services 
(connections) on the Device.

Network Setting > Broadband 

The following table describes the labels in this screen. 

Network Setting > Broadband

Add new WAN 
Interface

Click this button to create a new connection.

#

This is the index number of the entry.

Name

This is the service name of the connection.

Type

This shows whether it is an ATM, PTM, or Ethernet connection.

Mode

This shows whether the connection is in routing or bridge mode.

Encapsulation

This is the method of encapsulation used by this connection. 

802.1p

This indicates the 802.1p priority level assigned to traffic sent through this connection. This 
displays N/A when there is no priority level assigned.

802.1q

This indicates the VLAN ID number assigned to traffic sent through this connection. This 
displays N/A when there is no VLAN ID number assigned.

IGMP Proxy

This shows whether the Device act as an IGMP proxy on this connection.

NAT

This shows whether NAT is activated or not for this connection. 

Default 
Gateway

This shows whether the Device use the WAN interface of this connection as the system 
default gateway.

IPv6

This shows whether IPv6 is activated or not for this connection. IPv6 is not available when 
the connection uses the bridging service.