Buffalo TeraStation 1200 TS1200D0202-EU Ficha De Dados
Códigos do produto
TS1200D0202-EU
30
RAID Scanning
A RAID scan checks your RAID array for bad sectors and automatically repairs them if any are found. RAID 1 arrays
are supported. For best result, run RAID scans regularly.
are supported. For best result, run RAID scans regularly.
1
In Settings, click Drives.
2
Move the RAID scanning switch to the
position to enable RAID scanning.
3
Click
to the right of "RAID Scanning".
4
Click Edit.
5
Select when to run the scan and click OK.
Notes:
• Check "Immediately" to run a scan immediately.
• To stop a RAID scan, click Cancel RAID Scan.
• If a RAID scan is configured to start while the TeraStation is in sleep mode, the RAID scan will not run.
• Check "Immediately" to run a scan immediately.
• To stop a RAID scan, click Cancel RAID Scan.
• If a RAID scan is configured to start while the TeraStation is in sleep mode, the RAID scan will not run.
Adding an External Hard Drive
Connecting an External Drive
Your TeraStation includes USB ports (the number of ports depends on your model), and you can connect external
drives to these ports. Once connected they appear as shared folders on the TeraStation. Formatted drives are
detected automatically. Unformatted drives should be formatted in Settings.
After a USB drive is recognized, Windows adds "usbdisk X" under the TeraStation in "Network", where "X" is the USB
port where the hard drive is connected.
The following USB devices are supported by the TeraStation:
• USB storage devices
• Card readers (except for card readers that can recognize two or more memory cards)
• Digital cameras
• USB-connected UPSs
• USB printers
Buffalo external USB drives are recommended.
These devices are not supported:
drives to these ports. Once connected they appear as shared folders on the TeraStation. Formatted drives are
detected automatically. Unformatted drives should be formatted in Settings.
After a USB drive is recognized, Windows adds "usbdisk X" under the TeraStation in "Network", where "X" is the USB
port where the hard drive is connected.
The following USB devices are supported by the TeraStation:
• USB storage devices
• Card readers (except for card readers that can recognize two or more memory cards)
• Digital cameras
• USB-connected UPSs
• USB printers
Buffalo external USB drives are recommended.
These devices are not supported: