Buffalo LinkStation 441D + 4x DT01ACA200 LS441DE-EU + 4X DT01ACA200 Manual Do Utilizador
Códigos do produto
LS441DE-EU + 4X DT01ACA200
7
8
Link and Activity LED
This LED shows network activity. It blinks green when the LinkStation is accessed over the network.
This LED shows network activity. It blinks green when the LinkStation is accessed over the network.
9
LAN Port
Connect to a router, hub, or switch on your Ethernet network with the included Ethernet cable.
Connect to a router, hub, or switch on your Ethernet network with the included Ethernet cable.
10
Power Status LED
The LED glows green when the power cable is connected.
The LED glows green when the power cable is connected.
11
Power Connector
Use the included power cable to connect to a surge protector or outlet.
Use the included power cable to connect to a surge protector or outlet.
12
Anti-Theft Security Slot
Use this slot to secure your LinkStation with a cable lock (not included).
Use this slot to secure your LinkStation with a cable lock (not included).
13
Fan
Do not block the fan.
Do not block the fan.
Changing Admin Password and Adding a Shared Folder
After initial setup, changing your password and creating other shared folders are recommended.
1
Double-click the
icon to start NAS Navigator2.
2
Right-click on your LinkStation's icon and select Settings. On the Mac, select the LinkStation's icon while
holding down the control key, then select Settings.
holding down the control key, then select Settings.