Akasa VenomVoodoo AK-CC4008HP01 Ficha De Dados
Códigos do produto
AK-CC4008HP01
DOW CORNING CORPORATION
Material Safety Data Sheet
Page: 2 of 7
DOW CORNING(R) SC 102 COMPOUND
4. FIRST AID MEASURES
Eye:
Immediately flush with water.
Skin:
No first aid should be needed.
Inhalation:
No first aid should be needed.
Oral:
No first aid should be needed.
Comments:
Treat symptomatically.
5. FIRE FIGHTING MEASURES
Flash Point:
> 212 °F / > 100 °C (Seta Closed Cup)
Autoignition
Temperature:
Temperature:
Not determined.
Flammability Limits in Air:
Not determined.
Extinguishing Media:
On large fires use dry chemical, foam or water spray. On small fires use carbon dioxide
(CO2), dry chemical or water spray. Water can be used to cool fire exposed containers.
(CO2), dry chemical or water spray. Water can be used to cool fire exposed containers.
Fire Fighting Measures:
Self-contained breathing apparatus and protective clothing should be worn in fighting
large fires involving chemicals. Determine the need to evacuate or isolate the area
according to your local emergency plan. Use water spray to keep fire exposed containers
cool.
large fires involving chemicals. Determine the need to evacuate or isolate the area
according to your local emergency plan. Use water spray to keep fire exposed containers
cool.
Unusual Fire Hazards:
None.
Hazardous Decomposition Products
Thermal breakdown of this product during fire or very high heat conditions may evolve the following hazardous
decomposition products: Silicon dioxide. Carbon oxides and traces of incompletely burned carbon compounds.
Metal oxides. Formaldehyde.
6. ACCIDENTAL RELEASE MEASURES
Thermal breakdown of this product during fire or very high heat conditions may evolve the following hazardous
decomposition products: Silicon dioxide. Carbon oxides and traces of incompletely burned carbon compounds.
Metal oxides. Formaldehyde.
6. ACCIDENTAL RELEASE MEASURES
Containment/Clean up:
Observe all personal protection equipment recommendations described in Sections 5
and 8. Wipe up or scrape up and contain for salvage or disposal. Clean area as
appropriate since some silicone materials, even in small quantities, may present a slip
hazard. Final cleaning may require use of steam, solvents or detergents. Dispose of
saturated absorbant or cleaning materials appropriately, since spontaneous heating may
occur. Local, state and federal laws and regulations may apply to releases and disposal
of this material, as well as those materials and items employed in the cleanup of releases.
You will need to determine which federal, state and local laws and regulations are
applicable. Sections 13 and 15 of this MSDS provide information regarding certain
federal and state requirements.
and 8. Wipe up or scrape up and contain for salvage or disposal. Clean area as
appropriate since some silicone materials, even in small quantities, may present a slip
hazard. Final cleaning may require use of steam, solvents or detergents. Dispose of
saturated absorbant or cleaning materials appropriately, since spontaneous heating may
occur. Local, state and federal laws and regulations may apply to releases and disposal
of this material, as well as those materials and items employed in the cleanup of releases.
You will need to determine which federal, state and local laws and regulations are
applicable. Sections 13 and 15 of this MSDS provide information regarding certain
federal and state requirements.
Note: See section 8 for Personal Protective Equipment for Spills. Call Dow Corning Corporation, (989) 496-5900, if
additional information is required.
additional information is required.