Funai WD6D-M100 WD6DM100 Ficha De Dados

32

EN

Follow the steps below to record a TV programme.

(See page 70 for VCR recording.)

Q] to turn on the unit.

Turn on the TV and be sure to select the input to which the 
unit is connected.

\CLOSE EJECT A] to open the 

\CLOSE EJECT A] to close the 

G \ H] or 

The “I” mark will be displayed on the TV screen briefly.

To pause the recording, press [PAUSE F]. Press 
[PAUSE F] or [REC] again to restart the recording.

This is a simple way to set the recording time in blocks of 
30 minutes. Check that the disc you are recording onto 
has enough space remaining for the time you set. (See 
page 70 for VCR recording.)

One-touch Timer Recording will start.

• When the unit reaches the specified time, it will be 

turned off automatically.

• To change the recording length during One-touch Timer 

Recording, press [REC] repeatedly until the desired 
length appears.

• To cancel One-touch Timer Recording within the 

specified time, press [STOP C].

Press [STOP C] to stop the recording.

This operation may take a few moments to complete.

• You can change the channel while in the REC pause mode.
• Recording continues until the disc is full or you stop the 

recording.

• If the clock is not set, the date and time of title names will be 

01/01/10 and 00:00.

• You cannot change the recording speed in the REC or REC 

pause mode.

• Even if the broadcasting you are recording is in the SECAM 

system, this unit automatically converts it to the PAL system 
when recording.

• Up to 99 titles can be recorded on the DVD-RW/-R discs.
• You can play back a title on one component while making a 

recording on the other component. To do so, simply select 
the component (DVD or VCR) you want to use for the 
playback by pressing [DVD] or [VCR] during DVD / VCR 
recording. And then follow the normal playback procedure.

• NTSC recording is prohibited in this unit.
• The remaining recording time will appear on the TV screen 

during One-touch Timer Recording. Press [DISPLAY] to see 
it on the TV screen.

• The remaining recording time will be displayed on the front 

panel display during One-touch Timer Recording.

• Unlike the timer recording, you can perform the following 

operations during One-touch Timer Recording. 
- Turn off the power. (One-touch timer recording will be 

cancelled.)

- Use [REC] or [STOP C] on the remote control.

• You cannot use the pause function during One-touch Timer 

Recording. 

• The unit will be turned off automatically under the following 

conditions.
- No space remains on the disc.
- If a power failure occurs.

• If DVD One-touch Timer Recording is completed during 

VCR playback or recording, the DVD will be in stop mode 
and the VCR keeps the current mode.

• When One-touch Timer Recording is finished and the power 

is turned off, the unit will switch to the timer-standby mode 
automatically if a timer recording has been programmed. 
Press [TIMER SET] to cancel the timer-standby mode to 
use the unit continuously.

Disc tray guide

E9TF0ED_EN.book  Page 32  Wednesday, March 17, 2010  1:32 PM