DeLonghi DMX 664 V Manual Do Utilizador
1
2
3
4
5
6
7
8
WARNING - THIS APPLIANCE MUST BE EARTHED
IMPORTANT
The wires in the mains lead are coloured in accor-
dance with the following code:
dance with the following code:
Green and yellow:
Earth
Blue:
Neutral
Brown:
Live
As the colours of the wires in the mains lead may
not correspond with the coloured markings iden-
tifying the terminals in your plug, proceed as follows:
The green and yellow wire must be connected to the
terminal in the plug marked with the letter E or the
earth symbol
not correspond with the coloured markings iden-
tifying the terminals in your plug, proceed as follows:
The green and yellow wire must be connected to the
terminal in the plug marked with the letter E or the
earth symbol
or coloured green or green and
yellow.
The blue wire must be connected to the terminal
marked with the letter N or coloured black.
The brown wire must be connected to the terminal
marked with the letter L or coloured red.
The blue wire must be connected to the terminal
marked with the letter N or coloured black.
The brown wire must be connected to the terminal
marked with the letter L or coloured red.
ELECTRICAL CONNECTION (UK ONLY)
A) If your appliance comes fitted with a plug, it
will incorporate a 13 Amp fuse. If it does not fit
your socket, the plug should be cut off from the
mains lead, and an appropriate plug fitted, as
below.
WARNING: Very carefully dispose of the cut
off plug after removing the fuse: do not insert in
a 13 Amp socket elsewhere in the house as this
could cause a shock hazard.
With alternative plugs not incorporating a fuse,
the circuit must be protected by a 15 Amp fuse.
your socket, the plug should be cut off from the
mains lead, and an appropriate plug fitted, as
below.
WARNING: Very carefully dispose of the cut
off plug after removing the fuse: do not insert in
a 13 Amp socket elsewhere in the house as this
could cause a shock hazard.
With alternative plugs not incorporating a fuse,
the circuit must be protected by a 15 Amp fuse.
If the plug is a moulded-on type, the fuse cover
must be re-fitted when changing the fuse using
a 13 Amp Asta approved fuse to BS 1362. In
the event of losing the fuse cover, the plug must
NOT be used until a replacement fuse cover
can be obtained from your nearest electrical
dealer. The colour of the correct replacement fu-
se cover is that as marked on the base of the
plug.
must be re-fitted when changing the fuse using
a 13 Amp Asta approved fuse to BS 1362. In
the event of losing the fuse cover, the plug must
NOT be used until a replacement fuse cover
can be obtained from your nearest electrical
dealer. The colour of the correct replacement fu-
se cover is that as marked on the base of the
plug.
B)
If your appliance is not fitted with a plug, plea-
se follow the instructions provided below:
se follow the instructions provided below: