Wuerth Elektronik Pushbutton 12 Vdc 0.05 A 1 x Off/(On) Würth Elektronik momentary 1 pc(s) 440YS67082622 Ficha De Dados
Códigos do produto
440YS67082622
DATE
FILE
REV
BY
EDV NO
Date
Checked
Drawn
Name
Scale
DESCRIPTION
Position
GENERAL TOLERANCE
Basic material
Projection
Drawing.- No.
WS-TLT 12x12mm Tact Switch with integrated LED, THT version
440xx67082622
440xx67082622.dft
12-09-21
Jelisarow
SwTLT
2:1
System :Solid Edge V20
WE
eiCan
eiCan
CAD
Würth Elektronik
eiCan
.x = +/- 0,2
.xx = +/- 0,15
.xx = +/- 0,15
A4
SIZE
Scale - 2:1
This electronic component is designed and developed with the intention for use in general electronics
equipments.
Before incorporating the components into any equipments in the field such as aerospace, aviation,
nuclear control, submarine, transportation, (automotive control, train control, ship control),
transportation signal, disaster prevention, medical, public information network etc. where higher
safety and reliability are especially required or if there is possibility of direct damage or injury to
human body, Wurth Elektronik must be asked for a written approval.
In addition, even electronic component in general electronic equipments, when used in electrical
circuits that require high safety, reliability functions or performance, the sufficient reliability
evaluation-check for the safety must be performed before by the user before usage.
equipments.
Before incorporating the components into any equipments in the field such as aerospace, aviation,
nuclear control, submarine, transportation, (automotive control, train control, ship control),
transportation signal, disaster prevention, medical, public information network etc. where higher
safety and reliability are especially required or if there is possibility of direct damage or injury to
human body, Wurth Elektronik must be asked for a written approval.
In addition, even electronic component in general electronic equipments, when used in electrical
circuits that require high safety, reliability functions or performance, the sufficient reliability
evaluation-check for the safety must be performed before by the user before usage.
TECHNICAL CHARACTERISTICS
SPECIFICATION
>Rating: 50mA, 12VDC
>Contact Resistance:
Initial: 100mOHM max.
After Life Test: 2OHM max.
>Insulation Resistance: min. 100MOHM at 500VDC
>Dielectric Strength: 500VAC for 1 minute
>Stroke:
>Contact Resistance:
Initial: 100mOHM max.
After Life Test: 2OHM max.
>Insulation Resistance: min. 100MOHM at 500VDC
>Dielectric Strength: 500VAC for 1 minute
>Stroke:
0.3 ± 0.1 mm
MATERIAL
>Diffuser plate:
PC UL HB
>Actuator: PA66 UL HB
>Frame: PA66 UL HB, color Black
>Contact: Stainless Steel with Ag
>Terminal: Brass with Ag
>Rubber: Silicone
>Frame: PA66 UL HB, color Black
>Contact: Stainless Steel with Ag
>Terminal: Brass with Ag
>Rubber: Silicone
SOLDERING INFORMATION
>Terminal in THT version
>Wave soldering 260°C 10 sec. max.
>Hand soldering under 350°C for 3 sec. max
>Wave soldering 260°C 10 sec. max.
>Hand soldering under 350°C for 3 sec. max
ENVIRONMENTAL
>Storage condition: -40°C ~ +85°C, 60% RH max.
>Operation condition: -40°C ~ +85°C
>Compliance: ROHS, Reach
>Operation condition: -40°C ~ +85°C
>Compliance: ROHS, Reach
HANDLING ADVISE
>ESD prevention methods need to be applicated for manual handling
and processing by machinery
>Resistors for protection are obligator
and processing by machinery
>Resistors for protection are obligator
PACKAGING INFORMATION
>ESD Tray
P.C.B. MOUNTING PLAN
CIRCUIT DIAGRAM
10,16
5
,0
8
5,08
O
1
,0
O
1
,2
1
2
,0
12,0
10,16
11,0
4
,0
5
8
,2
3
,3
0
,9
5,08
0,8
5,08
0,8
Polarity Mark
(Cathode)
A
B
LED SCHEMATIC
Switch
3
4
PN
Force
Color of LED
Life cycle
440 RS670 82622
220g ± 50gf
Red
100.000
440 GS670 82622
220g ± 50gf
Green
100.000
440 BS670 82622
220g ± 50gf
Blue
100.000
440 YS670 82622
220g ± 50gf
Yellow
100.000