Gigabyte GA-Z97X-UD5H Ficha De Dados

- 20 -

Hardware Installation

The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices such as a USB

keyboard/mouse, USB printer, USB flash drive and etc.

Use this port to connect a PS/2 mouse or keyboard.

The D-Sub port supports a 15-pin D-Sub connector and supports a maximum resolution of 1920x1200@60Hz 

(the actual resolutions supported depend on the monitor being used). Connect a monitor that supports

D-Sub connection to this port.

The DVI-D port conforms to the DVI-D specification and supports a maximum resolution of 1920x1200

@60Hz (the actual resolutions supported depend on the monitor being used). Connect a monitor that

supports DVI-D connection to this port.

The USB 3.0 port supports the USB 3.0 specification and is compatible to the USB 2.0/1.1 specification.

Use this port for USB devices such as a USB keyboard/mouse, USB printer, USB flash drive and etc.

The HDMI port is HDCP compliant and supports Dolby True HD and DTS HD 

Master Audio formats. It also supports up to 192KHz/24bit 8-channel LPCM audio

output. You can use this port to connect your HDMI-supported monitor. The maximum supported resolution 

is 4096x2160@24Hz or 2560x1600@60Hz, but the actual resolutions supported are dependent on the

monitor being used.

(Note)  The DVI-D port does not support D-Sub connection by adapter.

After installing the HDMI device, make sure to set the default sound playback device to HDMI. 

(The item name may differ depending on your operating system. The screenshot below is from

Windows 8.1.)

In Windows 8.1, select Apps>Control Panel>Hardware and 

Sound>Sound>Playback, set Intel(R) Display Audio to the

default playback device.