Gigabyte GA-Z97X-UD5H Ficha De Dados

Página de 128
BIOS Setup
- 62 -
 
&
Power Loading
 
Enables or disables dummy load. When the power supply is at low load, a self-protection will activate causing 
it to shutdown or fail. If this occurs, please set to EnabledAuto lets the BIOS automatically configure this
setting. (Default: Auto)
 
&
Resume by Alarm
Determines whether to power on the system at a desired time. (Default: Disabled)
 
If enabled, set the date and time as following:
 

Wake up day: Turn on the system at a specific time on each day or on a specific day in a month.
 

Wake up hour/minute/second: Set the time at which the system will be powered on automatically.
 
Note: When using this function, avoid inadequate shutdown from the operating system or removal of the 
AC power, or the settings may not be effective.
 
&
Wake on LAN
Enables or disables the wake on LAN function. (Default: Enabled)
 
&
Soft-Off by PWR-BTTN
Configures the way to turn off the computer in MS-DOS mode using the power button.
 

Instant-Off  
Press the power button and then the system will be turned off instantly. (Default)
 

Delay 4 Sec.   Press and hold the power button for 4 seconds to turn off the system. If the power 
button is pressed for less than 4 seconds, the system will enter suspend mode.
 
&
RC6(Render Standby)
 
Allows you to determine whether to let the onboard graphics enter standby mode to decrease power 
consumption. (Default: Enabled)
 
&
AC BACK
 
Determines the state of the system after the return of power from an AC power loss.
 

Memory   
The system returns to its last known awake state upon the return of the AC power.
 

Always On  
The system is turned on upon the return of the AC power.
 

Always Off
The system stays off upon the return of the AC power. (Default)
2-7  Power Management