Conrad USB Digital Microscope 10x to 200x, 2.0 Megapixel 191341 Ficha De Dados
Códigos do produto
191341
Measurement
Double-click on the picture to enter into measurement interface. Under the ‘Measurement’ icon
, you
can choose any desired options to measure.
1. Any Angle Line Measurement
Simply click from one point and drag to the next point, and then click again to lock-in.
2. Straight Angle Line Measurement
The Line measurement allows you to measure from one point to the next. Simply click and drag to the
desired length, and then click again to lock-in.
3. 45 Degrees’ Angle Line measurement
This function is for any 45 Degrees’ Angle Line angle measurement. Simply click and drag to extend out
to the desired angle.
4. Continuous Line Measurement
The Continuous Line measurement allows you to measure any continuous desired length.
Simply click and drag from one point to other desired points, click again to lock-in.
5. Polygon Measurement
The Polygon Measurement allows you to measure the side-length, interior angle degree, circumference
and area of the polygon.
6. Radius Circle Measurement
Simply click and extend out to the desired radius, the radius, circumference and area of the circle will
show up accordingly.
7. Diameter Circle Measurement
Simply click and extend out to the desired diameter, the radius, circumference and area of the circle will
show up accordingly.
8. Three Points Circle Measurement
Simply define any three points and click, the radius, circumference and area of a circle will show up
accordingly.
9. Three Points Arc Measurement
Simply define any three points and click, the circumference of the arc as well as the radius and area of the
sector will show up accordingly.
10. Three Points Angle Measurement
This function allows measurement of an angle. Simply click and drag to extend out to the desired angle.
11. Four Points Angle Measurement
Simply define any two points and click for the first line, and repeat the action to create the second line,
the angle degree between two lines show up accordingly.
Change the Calibration
If change the magnification rate and adjust focus to capture picture, please calibrate the magnification rate
again.
1. Double click to open the picture, Click ‘
> Reset magnification > Reset picture magnification’ as
below. And then start calibration again (Calibration details please refer to page5, 6).
7