Hitachi hard disk 0J11285 500 GB 2.5 " 8 MB 0J11285 Ficha De Dados
Códigos do produto
0J11285
Z5K500 OEM Specifications
114
14.19 Read Multiple (C4h)
Command Block Output Registers
Command Block Input Registers
Register
7 6 5 4 3 2 1 0 Register
7 6 5 4 3 2 1 0
Data
- - - - -
-
-
- Data
- - - - - -
-
-
Feature
- - - - -
-
-
- Error
...See
Below...
Sector Count
V V V V V V V V Sector Count
V V V V V V V V
LBA Low
V V V V V V V V LBA Low
V V V V V V V V
LBA Mid
V V V V V V V V LBA Mid
V V V V V V V V
LBA High
V V V V V V V V LBA High
V V V V V V V V
Device
- L - - H H H H Device
- - - - H H H H
Command
1 1 0 0 0 1 0 0 Status
...See
Below...
Error Register
Status Register
7 6 5 4 3 2 1 0
7 6 5 4 3 2 1 0
CRC UNC 0
IDN
0
ABT T0N AMN BSY RDY
DF
DSC DRQ COR IDX ERR
0 V 0 V 0 V 0 0
0 V 0 V - 0 0 V
Table 85 Read Multiple Command (C4h)
The Read Multiple command reads one or more sectors of data from disk media, then transfers the data
from the device to the host.
from the device to the host.
The sectors are transferred through the Data Register 16 bits at a time. Command execution is identical
to the Read Sectors command except that an interrupt is generated for each block (as defined by the Set
Multiple command) instead of for each sector.
to the Read Sectors command except that an interrupt is generated for each block (as defined by the Set
Multiple command) instead of for each sector.
Output Parameters To The Device
Sector Count
Sector Count
The number of continuous sectors to be transferred. If zero is specified, then
256 sectors will be transferred.
256 sectors will be transferred.
LBA Low
The sector number of the first sector to be transferred. (L=0)
In LBA mode, this register contains LBA bits 0 - 7. (L=1)
In LBA mode, this register contains LBA bits 0 - 7. (L=1)
LBA High/Mid
The cylinder number of the first sector to be transferred. (L=0)
In LBA mode, this register contains LBA bits 8 - 15 (Mid), 16 - 23 (High). (L=1)
In LBA mode, this register contains LBA bits 8 - 15 (Mid), 16 - 23 (High). (L=1)
H
The head number of the first sector to be transferred. (L=0)
In LBA mode, this register contains LBA bits 24 - 27. (L=1)
In LBA mode, this register contains LBA bits 24 - 27. (L=1)
Input Parameters From The Device
Sector Count
Sector Count
The number of requested sectors not transferred. This will be zero, unless an
unrecoverable error occurs.
unrecoverable error occurs.
LBA Low
The sector number of the last transferred sector. (L=0)
In LBA mode, this register contains current LBA bits 0 - 7. (L=1)
In LBA mode, this register contains current LBA bits 0 - 7. (L=1)
LBA High/Mid
The cylinder number of the last transferred sector. (L=0)
In LBA mode, this register contains current LBA bits 8-15 (Mid), 16-23 (High).
(L=1)
In LBA mode, this register contains current LBA bits 8-15 (Mid), 16-23 (High).
(L=1)
H
The head number of the last transferred sector. (L=0)
LBA mode, this register contains current LBA bits 24 - 27. (L=1)
LBA mode, this register contains current LBA bits 24 - 27. (L=1)