Hitachi hard disk 0J11285 500 GB 2.5 " 8 MB 0J11285 Ficha De Dados
Códigos do produto
0J11285
Z5K500 OEM Specifications
41
9 Deviations from Standard
The device conforms to the referenced specifications, with deviations described below.
The interface conforms to the Working Document of Information Technology, AT Attachment 8 –
ATA/ATAPI Command Set (ATA/ATAPI8-ACS) with deviation as follows:
ATA/ATAPI Command Set (ATA/ATAPI8-ACS) with deviation as follows:
S.M.A.R.T. Return Status
S.M.A.R.T. RETURN STATUS subcommand does not check advisory
attributes. That is, the device will not report threshold exceeded condition
unless pre-failure attributes exceed their corresponding thresholds.
For example, Power-On Hours Attribute never results in negative reliability
status.
attributes. That is, the device will not report threshold exceeded condition
unless pre-failure attributes exceed their corresponding thresholds.
For example, Power-On Hours Attribute never results in negative reliability
status.
Check Power Mode
Check Power Mode command returns FFh to Sector Count Register when
the device is in Idle mode. This command does not support 80h as the
return value.
the device is in Idle mode. This command does not support 80h as the
return value.
10 Physical Interface
Physical Interface is described in Functional Specification part.