Hitachi hard disk 0J11285 500 GB 2.5 " 8 MB 0J11285 Ficha De Dados
Códigos do produto
0J11285
Z5K500 OEM Specifications
66
12.14
12.15
Native Command Queuing
Native Command Queuing feature (Read / Write FPDMA Queued commands) is supported. Please
refer to the Serial ATA II Specification about Native Command Queuing.
refer to the Serial ATA II Specification about Native Command Queuing.
The host shall not issue a legacy ATA command while a native queued command is outstanding. Upon
receiving a legacy ATA command while a native queued command is outstanding, the device aborts the
command and halts command processing of outstanding native queued commands.
receiving a legacy ATA command while a native queued command is outstanding, the device aborts the
command and halts command processing of outstanding native queued commands.
SMART Command Transport (SCT)
SMART Command Transport (SCT) feature set is supported. The SMART Read Log and SMART Write
Log commands or Read Log Ext and Write Log Ext commands are used to issue a command in this
feature sets. Log page E0h is used to issue commands and return status. Log page E1h is used to
transport data. Please refer to the section 8 SCT Command Transport in ATA8-ACS specification for
more detail.
Log commands or Read Log Ext and Write Log Ext commands are used to issue a command in this
feature sets. Log page E0h is used to issue commands and return status. Log page E1h is used to
transport data. Please refer to the section 8 SCT Command Transport in ATA8-ACS specification for
more detail.
The following Action codes are supported.
Action code
Description
0002h
Write Same command
0003h
Error Recovery Control command
Feature Control command
Feature Control command
Feature code 0001h
Write Cache
0004h
Feature code 0003h
Time Interval for temperature logging
0005h
SCT Data Table command
Table 39 SCT Action Code Supported