Hitachi hard disk 0J11285 500 GB 2.5 " 8 MB 0J11285 Ficha De Dados
Códigos do produto
0J11285
Z5K500 OEM Specifications
84
14.7 Format Track (50h: Vendor Specific)
Command Block Output Registers
Command Block Input Registers
Register
7 6 5 4 3 2 1 0 Register
7 6 5 4 3 2 1 0
Data
- - - - -
-
-
- Data
- - - - - -
-
-
Feature
- - - - -
-
-
- Error
...See
Below...
Sector
Count
- - - - -
-
-
- Sector
Count
- - - - - -
-
-
LBA Low
V V V V V V V V LBA Low
V V V V V V V V
LBA Mid
V V V V V V V V LBA Mid
V V V V V V V V
LBA High
V V V V V V V V LBA High
V V V V V V V V
Device
- L - - H H H H Device
- - - - H H H H
Command
0 1 0 1 0 0 0 0 Status
...See
Below...
Error Register
Status Register
7 6 5 4 3 2 1 0
7 6 5 4 3 2 1 0
CRC UNC 0
IDN
0
ABT T0N AMN BSY RDY
DF
DSC DRQ COR IDX ERR
0 0 0 V 0 V 0 0
0 V 0 V - 0 0 V
Table 52 Format Track Command (50h)
The Format Track command formats a single logical track on the device. Each good sector of data on the
track will be initialized to zero with write operation. At this time, whether the sector of data is initialized
correctly is not verified with read operation. Any data previously stored on the track will be lost.
track will be initialized to zero with write operation. At this time, whether the sector of data is initialized
correctly is not verified with read operation. Any data previously stored on the track will be lost.
Output Parameters To The Device
LBA Low
LBA Low
In LBA mode, this register specifies LBA address bits 0 - 7 to be formatted. (L=1)
LBA High/Mid
The cylinder number of the track to be formatted. (L=0)
In LBA mode, this register specifies LBA address bits 8 - 15 (Mid), 16 - 23 (High) to
be formatted. (L=1)
In LBA mode, this register specifies LBA address bits 8 - 15 (Mid), 16 - 23 (High) to
be formatted. (L=1)
H
The head number of the track to be formatted. (L=0)
In LBA mode, this register specifies LBA address bits 24 - 27 to be formatted. (L=1)
In LBA mode, this register specifies LBA address bits 24 - 27 to be formatted. (L=1)
Input Parameters From The Device
LBA Low
LBA Low
In LBA mode, this register specifies current LBA address bits 0-7. (L=1)
LBA High/Mid
In LBA mode, this register specifies current LBA address bits 8 - 15 (Mid), 16 - 23
(High)
(High)
H
In LBA mode, this register specifies current LBA address bits 24 - 27. (L=1)
In LBA mode, this command formats a single logical track including the specified LBA.