Bicker Elektronik Bicker BEP-510 120 W Open Frame PC power supply BEP-510 Ficha De Dados

Códigos do produto

BEP-510

BEP-510

120 Watt

100 Watt continuous fanless power!
Operating temperature up to +70 °C
Efficiency up to 84 %

Input voltage

90…264 V AC (130…367 V DC), active PFC

Input frequency

47…63 Hz

Input current

2 A (115 V AC) / 1 A (230 V AC)

Inrush current

30 A (115 V AC) / 70 A (230 V AC)

Efficiency

≥80 % (at max load and 115 V AC)

Hold up time

>41 ms at 115 V AC and max load

Power-Good-Signal

Switch on delay 100…550 ms, Switch off delay 1 ms

Protection

Short circuit protection: at each output, switch off

Overload protection: 110…160 %, switch off

Overvoltage protection: switch off, +3.3 V (3.6…4.3 V), +5 V (5.6…6.5 V), +12 V (13.2…15 V)

Overtemperature protection: switch off

Earth leakage current

<3,5 mA

Safety / EMC

CE, UL 60950-1, TÜV: EN 60950-1

Operating temperature

0…+70 °C, start at -10 °C

Derating

See diagram

MTBF

202 000 h at +50 °C without fan according to MIL-HDBK-217F

Storage temperature

-20…+70 °C

Operating humidity

5…95 % RH, non-condensing

Dimensions (W x D x H)

83.8 x 165 x 40 mm ±0.4 mm

Weight (net)

0.6 kg

The ATX PC power supply BEP-510 is designed for the installation
into fanlessly operating computers for industrial applications. Its
innovative circuit design focuses on a high degree of efficiency,
which is 84 % at nominal load. The DC cable harness is firmly
connected to the unit. For applications with DC input the related
model BEP-510C is available.

Article

Output

Output current

Voltage

Ripple &

No.

voltage

min

max

regulation

Noise

BEP-510

+3.3 V

0 A 12 A

±5 %

50 mV

+5 V

0 A 14 A

±5 %

50 mV

+12 V

0 A 8 A

±5 %

120 mV

-12 V

0 A 0.5 A

±10 %

120 mV

+5 V

0 A 1.5 A

±5 %

50 mV

5 °C 10 °C 15 °C 20 °C 25 °C 30 °C 35 °C 40 °C 45 °C 50 °C

100 W

86 W

Fanless operation from 0…+50 °C

10 °C 20 °C 30 °C 40 °C 50 °C 60 °C 70 °C

100 %

75 %
50 %
25 %

0 %

Derating from +50…+70 °C

Supplementary data for derating from +50…+70 °C

Fanless 86 W

Load at +3.3 V / +5 V fanless (50 W)

120 W with 20 CFM fan

Load at +3.3 V / +5 V with 20 CFM fan (70 W)

Output current per channel

Output power at +3.3 V, +5 V, +12 V and -12 V is 93 W (without fan). 100 W power can be supplied without fan, and
120 W full power using a 20 CFM fan. As a power component this PSU is for assembly purposes only and must not
be operated in unassembled condition. The final assembly has to comply with the valid EMC and safety standards.

Industrial PC power supplies

C i

Te c h n i c a l d a t a

Bicker Elektronik GmbH

| 86609 Donauwörth | Germany

Tel. +49 906 70595-0 | info@bicker.de |

www.bicker.de

Extended

Delivery

Fanless

Eco

Operation