Megasat SG 2100 A Radio transmission N/A 090076 Manual Do Utilizador

02

03

This device has been designed and manufactured to satisfy the international safety stan-
dards. Please read the following safety precautions carefully before operating this device.

Main Supply:
Before operating, please check the units operating voltage is 100~240V AC 50/60Hz.

Overload:
Do not overload a wall outlet, extension cord or adapter, neither use damaged power 
cord or touch it with wet hand as this may result in electric shock.

Liquid:
The receiver shall not be exposed to dripping or splashing water, and that no objects 
filled with liquids, such as base, shall be placed on the apparatus.

Ventilation:
Keep the slots on top of the receiver uncover to allow sufficient airflow to the unit. Do 
not put the device on soft furnishings or carpets. Do not expose the receiver to direct 
light or do not place it near a heater or in humid conditions. Do not stack other electronic 
equipments on top of the device.

Do not let children play with films or other packaging components, there is a risk of 
suffocation.

Cleaning:
Plug out the receiver from the wall outlet before cleaning. Clean the receiver by a soft 
cloth or mild solution of washing-up liquid (no solvents).

Location:
Put the device indoor in order to avoid lightening, raining or sunlight.

Uncover:
Do not remove the cover, to reduce the risk of electric shock. Contact qualified and li-
censed service personnel to repair the device, or contact your dealer.

1. Safety Instructions .......................................................................03

2. Introduction ......................................................................................04

3. Packing content .............................................................................04

4. Overview
 Transmitter .........................................................................................05
 Receiver ................................................................................................06
 

Remote control ................................................................................07

5. Installation
 

Step 1: Setup the Transmitter .................................................08

 

Step 2: Setup the Receiver ........................................................09

 

Step 3: Setup the Blaster and IR Sensor ............................10

 

Step 4: Boot up the Transmitter and Receiver ..............11

 

Step 5: Mounting the devices to the wall .......................15

4. Troubleshooting ............................................................................16

5. Supported Resolution ..............................................................17

6. Audio Bitrate Resolution ........................................................18

7. Specifications ...................................................................................18