Manhattan 179225 Manual Do Utilizador

This equipment is in compliance with the requirements of the following

regulations: eN 55022 Class B (2006); eN 55024 (1998+A1:2001+

A2:2003), (IEC/EN 61000-4-2 [1995+A1:1998+A2:2001)/-3(2006]).
C-Tick

This equipment is in compliance with the requirements of the following

regulations: EN 55022 (2006) Class B, AS/NZS CISPR22 © IEC: 2005.
VCCI

This equipment is in compliance with the requirements of the following

regulations: CISPR22 © IEC: 2005.

driVer inStAllAtion

Installing the device driver enables your computer’s operating system

to recognize the Hi-Speed USB 2.0 SVGA Converter once it’s connected.

Check your operating system and refer to the appropriate installation

procedure below to begin installing the device driver. IMPORTANT:

• Unplug the Hi-Speed USB 2.0 SVGA Converter from your PC or

notebook before executing any setup or un-install program.

• Make sure you connect the display device to the VGA (HD15)

connector of the Hi-Speed USB 2.0 SVGA Converter and switch it

on before plugging the converter into an available USB 2.0 port on

your PC or notebook (see Steps 6 and 7 below).

indoWs

2000/XP

1. Insert the enclosed driver Cd into the Cd-RoM drive. The setup

program should be launched automatically; if not, launch setup.exe

from your Cd drive manually.

When the InstallShield

Wizard welcome screen

displays, click “Next” to

continue.