Intel 320 LE80535NC013512 Ficha De Dados
Códigos do produto
LE80535NC013512
Mobile Intel
®
Celeron
®
Processor (0.18µ) in BGA2 and Micro-PGA2 Packages
Datasheet
283654-003
60
normal operating conditions at nominal voltages. TDP
TYP
power is lower than TDP
MAX
. Contact
your Intel Field Sales Representative for further information.
6.1 Thermal
Diode
The mobile Intel Celeron processor has an on-die thermal diode that can be used to monitor the die
temperature(T
temperature(T
J
). A thermal sensor located on the motherboard, or a stand-alone measurement kit,
may monitor the die temperature of the processor for thermal management or instrumentation
purposes. Table 33 and Table 34 provide the diode interface and specifications.
purposes. Table 33 and Table 34 provide the diode interface and specifications.
Note: The reading of the thermal sensor connected to the thermal diode will not necessarily reflect
the temperature of the hottest location on the die. This is due to inaccuracies in the thermal sensor,
on-die temperature gradients between the location of the thermal diode and the hottest location on
the die, and time based variations in the die temperature measurement. Time based variations can
occur when the sampling rate of the thermal diode (by the thermal sensor) is slower than the rate at
which the T
the temperature of the hottest location on the die. This is due to inaccuracies in the thermal sensor,
on-die temperature gradients between the location of the thermal diode and the hottest location on
the die, and time based variations in the die temperature measurement. Time based variations can
occur when the sampling rate of the thermal diode (by the thermal sensor) is slower than the rate at
which the T
J
temperature can change.
Table 33. Thermal Diode Interface
Signal Name
Pin/Ball Number
Signal Description
THERMDA AA15
Thermal
diode
anode
THERMDC AB16
Thermal
diode
cathode
Table 34. Thermal Diode Specifications
Symbol Parameter
Min Typ Max Unit
Notes
I
FW
Forward Bias Current
5
500
µ
A
Note 1
n
Diode Ideality Factor
1.0057 1.0080 1.0125
Notes 2, 3, 4
NOTES:
1.
Intel does not support or recommend operation of the thermal diode under reverse bias. Intel does not
support or recommend operation of the thermal diode when the processor power supplies are not within
their specified tolerance range.
support or recommend operation of the thermal diode when the processor power supplies are not within
their specified tolerance range.
2.
Characterized at 100°C.
3.
Not 100% tested. Specified by design/characterization.
4.
The ideality factor, n, represents the deviation from ideal diode behavior as exemplified by the diode
equation: Where I
equation: Where I
s
= saturation current, q = electronic charge, V
d
= voltage across the diode, k =
Boltzmann Constant, and T = absolute temperature (Kelvin).
−
⋅
=
1
q
S
FW
nkT
V
D
e
I
I