Philips 2000 series LED TV 39PFL2908 39PFL2908/F7 Ficha De Dados

41

English

Upgrading the software

USB upgrade

You can upgrade the software by using USB Memory Stick.

1

Connect your USB Memory Stick with the upgrade file to the USB 
terminal on the side of your TV.

2

Use ▲▼ to select Software update, then press OK.

3

Use ▲▼ to select USB, then press OK.

4

Use ▲▼ to select the desired Update file.

5

Use ◄► to select Yes, then press OK.

6

Read the on-screen instructions and confirm that you want to 
continue with the installation.

7

When the software upgrade is completed, press   to set the unit 
into Standby mode, then remove the USB Memory Stick.

8

Unplug the AC power cord for a few seconds from AC outlet and 
plug it again.

9

Press   again to Turn the unit On.
• The TV starts up with the new software.

For further assistance, please contact Call Center.

Network update

You can update the software by connecting the unit to the Internet.

1

Use ▲▼ to select Software update, then press OK.

2

Use ▲▼ to select Network, then press OK.

3

Use ◄► to select Yes, then press OK.
• This unit will then start checking for the latest firmware version.

4

Confirmation message will appear. 
Use ◄► to select Yes, then press OK.
• The unit will start downloading the latest firmware version.
• The unit will start updating the firmware version.
• It may take a while to complete the updating.

5

When the software update is complete, press   to make sure the 
unit goes to Standby mode. 

6

Unplug the AC power cord for a few seconds from AC outlet and 
plug it again.

7

Press   again to Turn the unit On.
• The TV starts up with the new software.

For further assistance, please contact Call Center.

Recovery update

If the unit turns off during the software upgrade, an error message will 
be displayed when you turn it on next time. In this case, please follow 
the procedure below to start the software upgrade again. The unit will 
not work correctly unless the software upgrade is completed.

1

Follow steps 1 to 2 in Downloading the software 

2

Click the software for recovery update to be downloaded.
• Decompress the ZIP-file.

3

Copy the  recovery update file to the root directory of the USB 
Memory Stick

4

Connect the USB Memory Stick with the  recovery update file to 
the USB terminal on the side of your TV, then press OK.

5

When the software update is complete, remove the USB Memory 
Stick.

6

Unplug the AC power cord for a few seconds from AC outlet and 
plug it again.
• The TV starts up with the new software.

For further assistance, please contact Call Center.

Automatically check for latest software

This function lets you know if the latest software is available while the 
unit is connected to the Internet.

1

Use ▲▼ to select Automatically check for latest software, then 
press OK.

2

Use ▲▼ to select the desired option, then press OK.

Netflix deactivation

Displays the deactivation setting for Netflix.

1

Use ▲▼ to select Netflix deactivation, then press OK.

2

Use ▲▼ to select the desired option, then press OK.

Software update is in progress. Please wait.
Do not remove the USB storage device or turn the TV off while 
upgrade is in progress.
 

Update your TV with new software:

Note

• In order to update software via the Internet, you must connect the unit to the Internet 

and set up necessary settings. Network settings assistant 

• Please do not unplug the AC power cord or Ethernet cable while executing the 

Network update.

• All settings will remain the same even if you update the software version.

• The version of Net service will also be updated if newer version of Net service is 

available when updating the firmware.

Off

Disable automatically check for latest software.

On

A message will appear if there is the latest software on the 

network server.

Off

Deactivate the connection to Netflix.

On

Activate the connection to Netflix.