Kawasaki 840121 Manual Do Utilizador
NEVER vacuum up smoldering cigarette butts, hot ashes or any other burning mate-
rial. This may cause the unit to burst into flame.
rial. This may cause the unit to burst into flame.
NEVER use the vacuum if the filter is wet or missing.
BLOWING SAFETY
DO NOT use Wet/Dry Vacuum/Blower as a sprayer.
DO NOT point the nozzle or exhaust vents toward your eyes, ears or hair. DO NOT
point nozzle at bystanders or animals. Keep air discharge directed at the work area.
point nozzle at bystanders or animals. Keep air discharge directed at the work area.
Keep children away while blower is in use.
USE ONLY for dust, dirt, leaves and other light debris. This product should not be
used for heavy-duty blowing.
used for heavy-duty blowing.
If you have a pacemaker, consult your doctor before
using this product. This equipment could cause pacemaker interference or fail-
ure when used at close quarters.
ure when used at close quarters.
GROUNDING INSTRUCTIONS
The electrical power source for this Wet/Dry Vacuum/Blower MUST be grounded in
order prevent possible electric shock or even death should the tool malfunction or
breakdown. Grounding provides a path of least resistance for electric current thus
reducing the risk of electrical shock. The power source must also use a minimum
20A service and not used if other power tools on the same circuit are in use.
order prevent possible electric shock or even death should the tool malfunction or
breakdown. Grounding provides a path of least resistance for electric current thus
reducing the risk of electrical shock. The power source must also use a minimum
20A service and not used if other power tools on the same circuit are in use.
This Wet/Dry Vacuum/Blower is equipped with a grounded 3-wire power cord with
a 3-prong plug. If the power cord will not fit into the wall plug, an approved adapter
can be used as long as it is connected to the center screw in the wall plate. Never
modify the electrical plug by cutting off the grounding prong so it will fit into unap-
proved, un-grounded electrical receptacles.
a 3-prong plug. If the power cord will not fit into the wall plug, an approved adapter
can be used as long as it is connected to the center screw in the wall plate. Never
modify the electrical plug by cutting off the grounding prong so it will fit into unap-
proved, un-grounded electrical receptacles.
SAFETY RULES FOR WET / DRY VACUUM / BLOWERS
Never immerse the motor housing in water or liquid. Do not expose to rain
or other wet conditions. Failure to keep motor housing dry will lead to risk of
electric shock.
or other wet conditions. Failure to keep motor housing dry will lead to risk of
electric shock.
Never handle the Wet/Dry Vacuum/Blower with wet hands.
Keep body away from grounded surfaces like refrigerators, pipes or ranges.
For additional protection against shock, connect the Wet/Dry Vacuum/Blower
to an outlet with a Ground Fault Circuit Interrupter (GFCI).
to an outlet with a Ground Fault Circuit Interrupter (GFCI).
Keep the ventilation openings clear of dust, hair, paper or anything else that
may restrict air flow.
may restrict air flow.
NEVER run the Wet/Dry Vacuum/Blower over the cord.
DO NOT vacuum toxic materials.
STOP using the Wet/Dry Vacuum/Blower immediately if the motor housing
breaks and the motor or any other electrical components are exposed. Using
the Wet/Dry Vacuum/Blower in this condition could lead to shock or serious
personal injury.
breaks and the motor or any other electrical components are exposed. Using
the Wet/Dry Vacuum/Blower in this condition could lead to shock or serious
personal injury.
Always wear safety goggles or eye protection when using this tool. Operation
of the Wet/Dry Vacuum/Blower can result in foreign objects being blown into
the eyes resulting in severe eye damage. NOTE: Everyday glasses are not SAFE-
TY GLASSES and not compliant with ANSI.
of the Wet/Dry Vacuum/Blower can result in foreign objects being blown into
the eyes resulting in severe eye damage. NOTE: Everyday glasses are not SAFE-
TY GLASSES and not compliant with ANSI.
Use a dust mask or respirator for applications which generate dust.
Always wear an OSHA approved dusk mask or respirator when inside the
work area. Replace the filter daily. NOTE: Not all dust masks offer protection
from lead paint dust. Be sure to use the proper mask for the job.
work area. Replace the filter daily. NOTE: Not all dust masks offer protection
from lead paint dust. Be sure to use the proper mask for the job.
Wear ear protection when using the Wet/Dry Vacuum/Blower for extended
hours or when using it in a noisy area.
hours or when using it in a noisy area.
Maintain labels and nameplates on the Vacuum/Blower. These carry impor-
tant information. If unreadable or missing, contact Alltrade for a replacement.
tant information. If unreadable or missing, contact Alltrade for a replacement.
VACUUM SAFETY
NEVER leave Wet/Dry Vacuum/Blower running unattended.
NEVER vacuum in the presence of flammable or explosive materials such as gasoline,
natural gas, coal dust, magnesium dust, gun powder, hydrogen, solvents or lighter
fluid. Sparks inside the motor can cause flammable dust, liquid or gases to explode.
natural gas, coal dust, magnesium dust, gun powder, hydrogen, solvents or lighter
fluid. Sparks inside the motor can cause flammable dust, liquid or gases to explode.
DO NOT vacuum toxic materials.
DO NOT use for grooming animals.
5
UNGROUNDED AC RECEPTACLE
GROUNDED RECEPTACLE
GROUNDING ADAPTER
WET/DRY VACUUM/BLOWER
POWER CORD
POWER CORD
WET/DRY VACUUM/BLOWER
POWER CORD
POWER CORD
COVERPLATE
MOUNTING SCREW