Telular SX4e TDMA Manual Do Utilizador
SX4e TDMA 800 • SX4e Tri-Mode
13
Technical Manual
Enable/Disable Zero Dial Delay for Frequently Called Numbers
Use the following key sequence to set the Zero Dial Delay option:
Press:
#
*
21
*
<Zero Dial Delay option> #
Enter:
0 to disable Zero Dial Delay option
1 to enable Zero Dial Delay option.
Enter either 0 or 1; otherwise the Phonecell will not update or store this value; the existing stored
parameter will remain. The factory default setting is 1.
parameter will remain. The factory default setting is 1.
Audio Output Level Control
Use the following key sequence to program the nominal audio output level:
Press:
#
*
69
*
<output level> #
The output level value is set to 0 for low , 1 for normal, and 2 for high. If the output level value is
greater than 2, it will be considered invalid. The factory default is 1.
greater than 2, it will be considered invalid. The factory default is 1.
Caller ID Format Selection
The following key sequence is used to enter the Caller ID format selection:
Press:
#
*
84
*
<CID format> #
The CID format value is set to 0 to select a CID Multiple Data Message Format (MDMF) with no
date or time information; set to 1 to select a CID MDMF with date and time information fixed at mid-
night, January 1; set to 2 to select a CID Single Data Message Format (SDMF) with date and time
information fixed at midnight, January 1 If the CID format value is greater than 2, it is considered
invalid. The factory default is 0.
date or time information; set to 1 to select a CID MDMF with date and time information fixed at mid-
night, January 1; set to 2 to select a CID Single Data Message Format (SDMF) with date and time
information fixed at midnight, January 1 If the CID format value is greater than 2, it is considered
invalid. The factory default is 0.