Protection 1 ProtectionOne Security System 250P1 Manual Do Utilizador
- 19 -
Arming Perimeter Only
(with No Entry Delay)
Using the 7 Key
INSTANT
Use this key when you are staying home and do not expect anyone to
use the entrance door.
use the entrance door.
When armed in INSTANT mode, the system will sound an alarm if a
protected door or window is opened, but you may otherwise move
freely throughout the premises. The alarm will also sound
immediately if anyone opens the entrance door. Close all protected
perimeter windows and doors before arming (see Checking for
Open Zones section). The green READY indicator on the keypad
should be lit if the system is ready to be armed.
protected door or window is opened, but you may otherwise move
freely throughout the premises. The alarm will also sound
immediately if anyone opens the entrance door. Close all protected
perimeter windows and doors before arming (see Checking for
Open Zones section). The green READY indicator on the keypad
should be lit if the system is ready to be armed.
1.
+ 7
(Security Code)
INSTANT
Enter 4-digit security code, then press the
INSTANT key.
INSTANT key.
Example: Press
7 2 9 6 , t
hen
7
o r , f o r Q u i c k Ar m i n g
( i f e n a b l e d ) :
( i f e n a b l e d ) :
Press the [#] key followed by the INSTANT
key.
key.
2.
A R M E D * I N S T A N T *
y o u m a y e x i t n o w
y o u m a y e x i t n o w
Listen for 3 beeps.
The keypad beeps three times and displays the
ARMED INSTANT message. The red ARMED
indicator also lights.
The keypad beeps three times and displays the
ARMED INSTANT message. The red ARMED
indicator also lights.
You can restart the exit delay at any time after arming in INSTANT
mode by pressing the ✴ key. This is useful if you wish to open the
mode by pressing the ✴ key. This is useful if you wish to open the
entry/exit door to let someone in or out after arming the system
without having to disarm the system and then re-arm it again
†
.
†
Refer to the note at bottom of page 20 dealing with the automatic Exit Restart feature.