Protection 1 ProtectionOne Security System 250P1 Manual Do Utilizador
- 23 -
Disarming and Silencing Alarms
(cont'd)
To silence burglary alarms:
1.
(Security Code)
Enter 4-digit security code.
Example: Press 7 2 9 6
To clear the display after silencing alarm:
2.
A L A R M 0 3 Z O N E 0 3
Listen for 1 beep.
The keypad displays the alarm memory.
The keypad displays the alarm memory.
Enter 4-digit security code, then press
the OFF key.
the OFF key.
Example: Press 7 2 9 6 then 1
3.
* * D I S A R M * *
R E A D Y T O A R M
Listen for 1 beep.
The keypad displays the READY TO ARM
message and beeps once to confirm that the
system is disarmed.
The keypad displays the READY TO ARM
message and beeps once to confirm that the
system is disarmed.
Memory of Alarm
If an alarm occurs, the keypad displays the zone number(s) that
caused the alarm and the type of alarm. These messages remain
displayed until cleared by a user.
caused the alarm and the type of alarm. These messages remain
displayed until cleared by a user.
To clear the display:
Note the zone number displayed and enter an OFF sequence.
+ 1 *
(Security Code)
OFF
Enter 4-digit security code, then
press the OFF key.*
press the OFF key.*
Example: Press 7 2 9 6 then 1 *
If the READY message will not display, go to the displayed zone and
correct the fault (close windows, etc.). If the fault cannot be corrected,
notify your alarm company.
correct the fault (close windows, etc.). If the fault cannot be corrected,
notify your alarm company.
* In cases of an alarm, trouble, or CHECK message, the 4-digit
security code and OFF key must be entered into the system two times
to clear the display.
to clear the display.