Protection 1 ProtectionOne Security System 250P1 Manual Do Utilizador
- 47 -
Maintaining Your System
(cont'd)
Important: Use only batteries recommended by your installer as
replacement.
replacement.
Silencing Low Battery Warning Tones at the Keypad
You can silence the keypad’s warning tones by pressing the
1
key,
OFF
but the keypad's LOW BATTERY message display will remain on as
a reminder that you have a low-battery condition in one or more of
your sensors. When you replace the weak battery with a fresh one, the
sensor will send a "good battery" signal to the control as soon as the
sensor is activated (opening/closing of door, window, etc.), causing the
LOW BATTERY display to turn off. If the sensor is not activated, the
display will automatically clear within approximately 1 hour.
a reminder that you have a low-battery condition in one or more of
your sensors. When you replace the weak battery with a fresh one, the
sensor will send a "good battery" signal to the control as soon as the
sensor is activated (opening/closing of door, window, etc.), causing the
LOW BATTERY display to turn off. If the sensor is not activated, the
display will automatically clear within approximately 1 hour.
Routine Care
• Treat the components of your security system as you would any
other electrical equipment. Do not slam sensor-protected doors or
windows.
windows.
• Keep dust from accumulating on the keypad and all protective
sensors, particularly on motion sensors and smoke detectors.
• The keypad and sensors should be cleaned carefully with a dry soft
cloth. Do not spray water or any other fluid on the units.