Vocopro GIG MAN PLUS Manual Do Utilizador

7

1. POWER button - This button is used to turn the GIG MAN PLUS ‘ON’ or place it in STANDBY mode. 

    NOTE: When in STANDBY mode, the GIG MAN PLUS is not completely powered down and it still contains residual  

2. INPUT button - This button toggles through all of the INPUT channels (DISC, TUNER, AV1, AV2) for available INPUT 

    SOURCES.

3. 7-BAND GRAPHIC EQUALIZER - This GRAPHIC EQ is used to BOOST and/or CUT particular frequencies from 

    SOURCE MUSIC output. Each slide fader processes a particular frequency range indicated by the number above it. 

    Frequencies from 30Hz - 120Hz constitute the very low to low range. Frequencies from 120Hz to 1kHz are the mid-

    range and frequencies from 1kHz to 16kHz make up the high to very high range. To adjust, slide the fader up to  

    boost the frequency presence or down to cut the frequency presence.

4. GRAPHIC DISPLAY panel - This panel displays all graphical information regarding system operations, settings and  

    performance.

5. DIRECT TRACK ACCESS buttons - These buttons allow for DIRECT TRACK selection. For tracks 10 and up, press 

    the +10 button.  For example, to go directly to track 13, you would press +10 and 3, and for track 22, you would  

    press +10, +10 and 2.

6. REMOTE SENSOR - This sensor receives infrared signals transmitted by the REMOTE CONTROL transmitter. 

    NOTE: Obstacles located between the remote control and remote sensor should be avoided as they can prevent 

7. BASS control - This control increases/decreases the amount of LOW frequency response applied to the MASTER  

    VOLUME output.

8. TREBLE control - This control increases/decreases the amount of HIGH frequency response applied to the 

    MASTER VOLUME output.

9. ECHO LEVEL control - This control adjusts the level of ECHO applied to the MIC channels. Turn control clockwise to 

    INCREASE and counter-clockwise to DECREASE level.

10. REPEAT control - Use this control to adjust the REPEAT setting of the ECHO effect. As REPEAT adjusts the total 

      number of echo intervals prior to fade-out, the more REPEAT that is applied, the more ECHO intervals will occur  

      prior to fade-out. Turn control clockwise to INCREASE and counter-clockwise to DECREASE level.

PRESETS

Front Panel