Invacare Inflatable Bouncy Toy IH 5126 Manual Do Utilizador

1.

Position the column assembly on the base.

2.

Assemble the column assembly to the base with the two locknuts provided and tighten securely.

3.

Using extreme caution, push down on the outer column and remove the packing pin from the 

column assembly as shown in Detail “A”.

4.

Allow the column assembly to expand slowly.

5.

Position the table top on the column assembly and tighten securely with the six Phillips

 screws 

provided.

1.

Lift up on the handle on the side of the overbed table and adjust the overbed table to the desired 

height.

2.

When the table is at the desired height, release the handle.



Invacare products are specifically designed and manufactured for use in conjunction with Invacare 

accessories. Accessories designed by other manufacturers have not been tested by Invacare and 

are not recommended for use with Invacare products.



ALWAYS wear safety glasses and use extreme caution when removing the packing pin from the 

column assembly of the overbed table. The column assembly is spring loaded and will extend 

suddenly when the packing pin is removed. Serious injury or damage can occur.
After any adjustments, repair or service and before use, make sure that all attaching component 

parts are secure.





Phillips Screws

Locknuts

Column 

Assembly

Push Down with 

this Hand

Packing Pin

Table Top

Top View of 

Column Assembly

Base