BMW 2015 Z4 sDrive35is Manual Do Proprietário

In order to set the compass zones, press and
hold the adjustment button for 3‑4 seconds.
The number of the compass zone set is shown
in the display.
To change the zone setting, briefly press the
adjustment button repeatedly until the display
shows the number of the compass zone corre‐
sponding to your current location.
The compass is operational again after approx.
10 seconds.

The digital compass must be calibrated in the
following situations:

▷

An incorrect compass direction is shown.

▷

The cardinal direction displayed does not
change even if the direction of travel
changes.

▷

Not all compass directions are shown.

1.

Make sure that there are no large metal ob‐
jects or overhead power lines in the vicinity

of your vehicle and that you have enough
space to drive in a circle.

2.

Set the currently valid compass zone.

3.

Ensure that the retractable hardtop is fully
closed.

4.

Press the adjustment button for 6‑7 sec‐
onds to call up C. Then drive at least one
full circle at a maximum speed of
4 mph/7 km/h. When the system is cali‐
brated, the C is replaced by the compass
directions.

5.

Open the retractable hardtop fully and re‐
peat step 4.

Your digital compass is factory-set to right-
hand or left-hand steering, in accordance with
your vehicle.

You can set the language of the display:
Press the adjustment button for 12‑13 sec‐
onds. Briefly press the adjustment button

Seite 119

119

Online Edition for Part no. 01 40 2 954 104 - II/15