BMW 2015 Z4 sDrive35is Manual Do Proprietário
8-gear Sport automatic
transmission
Transmission positions
D Drive, automatic position
Position for normal vehicle operation. All for‐
ward gears are available.
Under normal operating conditions, fuel con‐
sumption is lowest when you are driving in po‐
sition D.
ward gears are available.
Under normal operating conditions, fuel con‐
sumption is lowest when you are driving in po‐
sition D.
Kickdown
Kickdown is used to achieve maximum driving
performance. Press on the accelerator beyond
the resistance point at the full throttle position.
performance. Press on the accelerator beyond
the resistance point at the full throttle position.
R is Reverse
Select only when the vehicle is stationary.
N is Neutral
The vehicle can roll.
N remains engaged after the engine is
switched off if the remote control remains in
the ignition lock. This function can be used in
an automatic car wash, refer to page
N remains engaged after the engine is
switched off if the remote control remains in
the ignition lock. This function can be used in
an automatic car wash, refer to page
example. P is automatically engaged after ap‐
prox. 30 minutes.
prox. 30 minutes.
P Park
The rear wheels are locked.
P is engaged automatically when the following
conditions are met:
P is engaged automatically when the following
conditions are met:
▷
The driver's door is opened while the en‐
gine is running, the safety belt is not fas‐
tened and neither the brake pedal nor the
accelerator is activated.
gine is running, the safety belt is not fas‐
tened and neither the brake pedal nor the
accelerator is activated.
▷
The engine is switched off unless N is en‐
gaged and the remote control is in the igni‐
tion lock.
gaged and the remote control is in the igni‐
tion lock.
▷
The remote control is removed from the ig‐
nition lock, refer to page
nition lock, refer to page
Before leaving the vehicle, ensure that the
transmission position P is engaged; otherwise,
the vehicle may begin to roll.
transmission position P is engaged; otherwise,
the vehicle may begin to roll.
Engaging transmission position
▷
Transmission position P can only be disen‐
gaged if the engine is running and the
brake pedal is pressed.
gaged if the engine is running and the
brake pedal is pressed.
▷
With the vehicle stationary, press on the
brake pedal before shifting out of P or N;
otherwise, the shift command will not be
executed: shift lock.
brake pedal before shifting out of P or N;
otherwise, the shift command will not be
executed: shift lock.
Press on the brake pedal until you start
driving
driving
To prevent the vehicle from creeping after you
select a driving position, maintain pressure on
the brake pedal until you are ready to start.◀
select a driving position, maintain pressure on
the brake pedal until you are ready to start.◀
Engaging transmission positions D, R,
N
Briefly push the selector lever in the desired di‐
rection, beyond a resistance point if necessary.
When shifting out of P or into R, simultane‐
ously push the unlock button 1.
The engaged transmission position is dis‐
played on the selector lever.
After releasing the selector lever, it returns to
its center position.
rection, beyond a resistance point if necessary.
When shifting out of P or into R, simultane‐
ously push the unlock button 1.
The engaged transmission position is dis‐
played on the selector lever.
After releasing the selector lever, it returns to
its center position.
Engaging transmission position P
Select only when the vehicle is stationary.
Seite 66
Controls
Driving
66
Online Edition for Part no. 01 40 2 954 104 - II/15