BMW 2015 Z4 sDrive35is Manual Do Proprietário

▷

High-beams off/headlamp flasher, arrow 2.

To reactivate the High-beam Assistant, briefly
push the turn indicator lever toward the high-
beams.

1.

"Settings"

2.

"Lighting"

3.

"High beam assistant"

The setting is stored for the remote control
currently in use.

Personal responsibility
The High-beam Assistant cannot serve

as a substitute for the driver's personal judg‐
ment of when to use the high beams. There‐
fore, manually switch off the high beams in sit‐
uations where this is required to avoid a safety
risk.◀

The system is not fully functional in situations
such as the following, and driver intervention
may be necessary:

▷

In very unfavorable weather conditions,
such as fog or heavy precipitation.

▷

In detecting poorly-lit road users, such as
pedestrians, cyclists, horseback riders and
wagons; when driving close to train or ship
traffic; and at animal crossings.

▷

In tight curves, on hilltops or in depres‐
sions, in cross traffic or half-obscured on‐
coming traffic on freeways.

▷

In poorly-lit towns and cities and in the
presence of highly reflective signs.

▷

At low speeds.

▷

When the windshield in front of the interior
rearview mirror is fogged over, dirty or cov‐
ered with stickers, etc.

The view field of the sensor is located on the
front of the interior rearview mirror.
Do not cover this area with stickers, etc.
Clean the view field, refer to page 

.

The parking lights or low beams must be
switched on to adjust the brightness.

1.

Push button 1 up or down repeatedly until
the appropriate symbol appears in the dis‐
play, accompanied by the brightness set‐
ting and the word "SET".

2.

Press button 2.

Seite 90

90

Online Edition for Part no. 01 40 2 954 104 - II/15