BMW 2015 Z4 sDrive35is Manual Do Proprietário
Always use wheels with TPM electronics to
ensure that the system will operate properly.
ensure that the system will operate properly.
Status display
1.
Press the button. The start menu
opens.
2.
"Vehicle Info"
3.
"Vehicle status"
4.
"TPM"
5.
The status is displayed.
Status indicator on the Control
Display
The tire and system status is indicated by the
color of the tires.
TPM takes into account that tire pressures
change while the vehicle is being driven.
color of the tires.
TPM takes into account that tire pressures
change while the vehicle is being driven.
All wheels are green
The system is active and issues warnings in
case of deviations from the tire inflation pres‐
sures stored last.
"TPM active" appears on the Control Display.
case of deviations from the tire inflation pres‐
sures stored last.
"TPM active" appears on the Control Display.
One wheel is yellow
Flat tire or major drop in inflation pressure in
the indicated tire. A message appears on the
Control Display.
the indicated tire. A message appears on the
Control Display.
All wheels are yellow
▷
Flat tire or major drop in inflation pressure
in several tires.
in several tires.
▷
The system was not reset after a wheel
change and issues warnings in case of de‐
viations from the tire inflation pressures
stored last.
change and issues warnings in case of de‐
viations from the tire inflation pressures
stored last.
▷
A flat tire in one or more tires while the sys‐
tem is being reset.
tem is being reset.
A message appears on the Control Display.
The wheels are gray
The system cannot detect a flat tire.
Possible reasons for this:
▷
TPM is being reset.
▷
Disturbance by systems or devices with
the same radio frequency.
the same radio frequency.
▷
Malfunction.
Status information
The status control display additionally shows
the current tire inflation pressures. It shows the
actual values read; they may vary depending
on driving style or weather conditions.
the current tire inflation pressures. It shows the
actual values read; they may vary depending
on driving style or weather conditions.
Resetting the system
Reset the system after adjusting the tire infla‐
tion pressure and every time a tire or wheel is
changed.
tion pressure and every time a tire or wheel is
changed.
1.
Press the button. The start menu
opens.
2.
"Vehicle Info"
3.
"Vehicle status"
4.
"Reset"
5.
Start the engine, but do not start driving.
6.
Start the system reset with "Reset".
7.
Drive away. The tires are shown in gray and
"Resetting TPM..." is displayed.
"Resetting TPM..." is displayed.
After a short trip at over 30 km/h, the set tire
inflation pressures are adopted as target val‐
ues. The system reset is completed as you
drive, and can be interrupted at any time.
When driving resumes, the reset is continued
automatically. On the Control Display, the tires
are shown in green and "TPM active" is dis‐
played again.
If a flat tire is detected while the system is re‐
setting and determining the inflation pres‐
sures, all tires on the Control Display are dis‐
played in yellow. The message "Low tire!" is
shown.
inflation pressures are adopted as target val‐
ues. The system reset is completed as you
drive, and can be interrupted at any time.
When driving resumes, the reset is continued
automatically. On the Control Display, the tires
are shown in green and "TPM active" is dis‐
played again.
If a flat tire is detected while the system is re‐
setting and determining the inflation pres‐
sures, all tires on the Control Display are dis‐
played in yellow. The message "Low tire!" is
shown.
Seite 97
Safety
Controls
97
Online Edition for Part no. 01 40 2 954 104 - II/15