BMW 2011 X5 xDrive50i Manual Do Proprietário
Practical interior accessories
134
1.
Insert the brackets at the respective notch
in the rail on the cargo area floor.
in the rail on the cargo area floor.
2.
Press down the brackets to push them into
the desired position.
the desired position.
3.
Check the firm seating of the brackets.
They must be clearly heard to engage.
They must be clearly heard to engage.
Do not lay cargo on the brackets, as oth-
erwise they could be unlocked.
erwise they could be unlocked.
<
Dividing up cargo area
You can position the cargo as follows:
>
Between the rear seat backrest and the
telescopic rail
telescopic rail
>
Between the telescopic rail and the retain-
ing strap
ing strap
Positioning cargo between telescopic rail and
retaining strap:
retaining strap:
1.
Lay the cargo on the telescopic rail. Press
the button, arrow
the button, arrow
1, and route the retaining
strap around the cargo, arrow
2.
2.
Hook the retaining strap into the mount
3
on the telescopic rail.
3.
Press the button of the bracket, arrow
1.
The retaining strap is tensioned.
You can also hook both retaining straps
into each other.
into each other.
<
When you are finished using the adaptive fixing
system, unhook the retaining strap and guide it
back into the bracket in order to prevent dam-
age and injury.
Then slide the fastening system toward the
front in order to permit the best possible use of
the cargo area.
system, unhook the retaining strap and guide it
back into the bracket in order to prevent dam-
age and injury.
Then slide the fastening system toward the
front in order to permit the best possible use of
the cargo area.
Removing brackets
Press down the brackets, slide them up to the
notches of the rails and remove them.
Depending on your vehicle's equipment pack-
age, you can store the adaptive fixing system
under the floor panel in the cargo area.
notches of the rails and remove them.
Depending on your vehicle's equipment pack-
age, you can store the adaptive fixing system
under the floor panel in the cargo area.
Ski bag*
The ski bag is designed for safe, clean transport
of up to 4 pairs of standard skis or up to
2 snowboards.
With the ski bag you can stow skis with a length
of up to 6.9 ft/2.10 m. When skis of 6.9 ft/
2.10 m in length are loaded, the ski bag will tend
to contract, reducing its overall capacity.
of up to 4 pairs of standard skis or up to
2 snowboards.
With the ski bag you can stow skis with a length
of up to 6.9 ft/2.10 m. When skis of 6.9 ft/
2.10 m in length are loaded, the ski bag will tend
to contract, reducing its overall capacity.
Before loading the ski bag, fold in the dis-
play screen of the DVD system in the
play screen of the DVD system in the
rear
*
, as otherwise the display screen could be
damaged.
<
Loading
1.
Fold down the center armrest, press the
button and open the cover.
button and open the cover.
2.
Press the button again; the cover in the
cargo area opens. If you press the button
firmly the first time, this cover also opens.
cargo area opens. If you press the button
firmly the first time, this cover also opens.
3.
Extend the ski bag between the front seats
and fill it. The zipper facilitates access to the
stowed items and drying of the ski bag.
and fill it. The zipper facilitates access to the
stowed items and drying of the ski bag.
4.
BMW X5: insert the latch plate of the ski bag
retaining strap into the center safety belt
buckle that is marked CENTER.
retaining strap into the center safety belt
buckle that is marked CENTER.
Online Edition for Part no. 01 41 2 604 009 - © 03/10 BMW AG
Online Edition for Part no. 01 41 2 604 009 - © 03/10 BMW AG