Horizon Fuel Cell Technologies Automobile Parts 180-1010 Manual Do Utilizador
16
Installation
Manual
FASS FUEL SYSTEM
STEP 3:
Mounting FASS System: Continued
NOTE:
The “L” shaped bracket attaches to the cab support on the short beds and
to the bed support on the long beds.
to the bed support on the long beds.
4.
Using photo’s 3C and 3D as a guide hold the FASS System (as high as possible) with
both brackets attached into the mounting location.
both brackets attached into the mounting location.
5.
While holding to the mounting location mark the mounting points.
6.
Using a center punch, mark the center of each bolt location.
7.
Drill 2 – 13/32 holes as seen in photo 3C to mount the frame bracket.
8.
Using the 2 – 3/8” bolts and flanged nuts mount the frame bracket to the proper
support. Torque to proper specifications.
support. Torque to proper specifications.
9.
Torque the 3/8” bolts attaching the frame bracket to the fuel pump bracket to proper
specifications.
specifications.
10.
Located on the filters, apply motor oil to the o-rings. Attach fuel filter and water
separator. Torque to proper specifications.
separator. Torque to proper specifications.