Baby Trend DOUBLE SNAP N GO 1304TW Manual Do Utilizador

Installation Instructions for Baby Trend

Latch-Loc

The Double Snap-N-Go

will accommodate the Latch-Loc

Infant Car

Seat. Please follow the following instructions for proper installation of the

Latch Loc.

Front Seat:

1. Remove (unscrew) Crossbars A1, B1, and C and D from the

Double

Snap-N-Go

frame Remove the Car Seat Straps from the

Double Snap-N-

frame. Retain the screws you remove.

2. Attach the Car Seat Straps to the

Double Snap-N-Go

frame using the

two holes labeled #5 as shown in figure 1. Use the two screws that you

removed in step 1.

3. Attach Crossbar C, to the

Double Snap-N-Go

frame using the two holes

labeled #7 as shown in figure 1.

Rear Seat:

1. Remove (unscrew) Crossbars A 2, B2 and B1 from the

Double Snap-N-

frame. See figure 2.

Insertion of the Latch-Loc

Infant Car Seat

1. With one hand grasp the car seat handle (in its upright, carrying position)

and gently place the seat, so that the baby faces the rear of the

Double

Snap-N-Go

, onto the

Double Snap-N-Go

so that the large groove on the

seat bottom, nearest the head-end of the seat, hooks over Crossbar BT1

in the front or crossbar BT2 in the rear. Check that the seat locked onto

the Crossbar. See Figure 3.

FOR SAFE OPERATION, IT IS VERY

IMPORTANT THAT THE SEAT LOCK SECURELY ONTO THE

CROSSBAR.

2. Feed the Car Seat Straps through the auto belt slots on the infant car

seat as shown in Figure 4 and snap the two buckles together. The

first time your do this, you will need to adjust the length of the strap

for a tight fit around the car seat.

FOR SAFE OPERATION, IT IS

VERY IMPORTANT THAT THE CAR SEAT STRAP IS ALWAYS

TIGHTLY FASTENED OVER THE CAR SEAT.

3. Test for secure installation by moving the car seat in all directions. The

car seat should be securely attached to the

Double Snap-N-Go

Removal of the Latch-Loc

Infant Car Seat:

1. Unlock the Car Seat Strap and remove from over the infant car seat.

2. With one hand, grasp the car seat handle (in its upright, carrying position)

and with your other hand squeeze the handle on the front of the car seat

and lift the car seat upward from the

Double Snap-N-Go

frame. See

Figure 5.

BT1

Hole #5

Hole #7

Strap

Hole #5

BT2

Bar C

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Baby Trend

and Latch-Loc

are the trademarks of their owners. They are

not associated with Baby Trend and no approval or endorsement is implied.