HP iPAQ Travel Companion RX5000 Manual Do Utilizador

High-speed wireless access to the Internet, email and corporate data

IEEE 802 Part 11b/g (802.11b/g)

2.4000 to 2.4835 GHz

Embedded Antenna

WEP 64/128-bit compliant to IEEE 802.11
Compliant to 802.1X (EAP-TLS, PEAP)
WPA

Ad-hoc (Peer to Peer)

Infrastructure (Access Points Required)

Modulation Technique Direct Sequence Spread Spectrum

DBPSK, DQPSK, CCK, OFDM

Receiver Sensitivity –
Packet Error Rate
(8E-2)

54 Mbps: <-60 dBm, PER < 8%, typical

11 Mbps: <-80 dBm, PER < 8%, typical

6 Mbps: <-80 dBm, PER < 8%, typical

1 Mbps: <-85 dBm, PER < 8%, typical

Transmit Output Power 12.5 dBm (typical 802.11g)

15 dBm (typical 802.11b)

Transmit mode: 1.33 Watts, typical

Receive mode: 1.235 Watts, typical

Media Access Protocol CSMA/CA (Collision Avoidance) with ACK

TCP/IP

IPX/SPX

UDP

Up to 1000 feet – Open sight

All necessary regulatory approvals for countries we support

NOTES:

1

 A standard WLAN infrastructure, separately purchased equipment, and a service contract with a

wireless airtime provider may be required for applicable wireless communication. Wireless Internet
use requires a separately purchased service contract. Check with wireless network service
providers for availability and coverage in your area. Not all web content available.

2

 Wireless access points required and are not included. Availability of public wireless access

points limited. Wireless Internet use may require separately purchased Internet service contract.

Bluetooth®
Specifications

High-speed, low-power, short-range wireless communication with other
Bluetooth devices

BRCM2045 solution

Single-Chip CMOS Bluetooth™ Solution

USB host interface

Support for Co-existence with Marvel WLAN chipset)

Broadcom stack and UI

Class 2/3 support

DA - 12532   North America — Version 4 — May 24, 2007

Page 6